Here is a new GB for the Joachim Gerhard Buffer Filter.
The orginal schematics can be found here :
http://www.diyaudio.com/forums/digi...ng-new-ess-vout-dac-es9022-7.html#post2867664
The prototype is shown here :
http://www.diyaudio.com/forums/digi...ng-new-ess-vout-dac-es9022-8.html#post3040691
Details of the offer :
http://www.diyaudio.com/forums/digi...g-new-ess-vout-dac-es9022-10.html#post3101883
Please add you name, continent, and quantity required as below :
Shaman 1x EU
MisterRogers 1x ??
jean-paul 1x EU
unixdeveloper 1x USA.
....
....
Patrick
The orginal schematics can be found here :
http://www.diyaudio.com/forums/digi...ng-new-ess-vout-dac-es9022-7.html#post2867664
The prototype is shown here :
http://www.diyaudio.com/forums/digi...ng-new-ess-vout-dac-es9022-8.html#post3040691
Details of the offer :
http://www.diyaudio.com/forums/digi...g-new-ess-vout-dac-es9022-10.html#post3101883
Please add you name, continent, and quantity required as below :
Shaman 1x EU
MisterRogers 1x ??
jean-paul 1x EU
unixdeveloper 1x USA.
....
....
Patrick
Attachments
Last edited:
Here is a new GB for the Joachim Gerhard Buffer Filter.
Please add you name, continent, and quantity required as below :
Shaman 1x EU
MisterRogers 1x ??
jean-paul 1x EU
unixdeveloper 1x USA.
buzzforb 2x USA
....
Patrick
> As I understand, those buffers suit only V-Out DAC chips. Is it correct?
Can also be used after the IV circuit, e.g.
http://www.diyaudio.com/forums/digi...-sen-evolution-minimalistic-iv-converter.html
> Are those buffers intended for Single Ended DAC chips?
Each PCB is meant for 2 channels of single ended, or one channel of balanced.
So you would need 2 boards for stereo balanced.
Patrick
Can also be used after the IV circuit, e.g.
http://www.diyaudio.com/forums/digi...-sen-evolution-minimalistic-iv-converter.html
> Are those buffers intended for Single Ended DAC chips?
Each PCB is meant for 2 channels of single ended, or one channel of balanced.
So you would need 2 boards for stereo balanced.
Patrick
> As I understand, those buffers suit only V-Out DAC chips. Is it correct?
Can also be used after the IV circuit, e.g.
http://www.diyaudio.com/forums/digi...-sen-evolution-minimalistic-iv-converter.html
> Are those buffers intended for Single Ended DAC chips?
Each PCB is meant for 2 channels of single ended, or one channel of balanced.
So you would need 2 boards for stereo balanced.
Patrick
Thanks, Patrick.
Just to be clear, is the Joachim Gerhard Filter Buffer an evolvement if the Sen/Sen I/V?
Can the Joachim Gerhard Filter Buffer be operated on batteries, or conventional PSU, or both?
Will there be an option to wire the Buffer for Current Output DAC Chips?
> Just to be clear, is the Joachim Gerhard Filter Buffer an evolvement if the Sen/Sen I/V?
It evolved round my ES9022 / WM8804 modules that Joachim had.
Please read the thread linked in post #1 for details.
> Can the Joachim Gerhard Filter Buffer be operated on batteries, or conventional PSU, or both?
Both.
> Will there be an option to wire the Buffer for Current Output DAC Chips?
No.
Patrick
It evolved round my ES9022 / WM8804 modules that Joachim had.
Please read the thread linked in post #1 for details.
> Can the Joachim Gerhard Filter Buffer be operated on batteries, or conventional PSU, or both?
Both.
> Will there be an option to wire the Buffer for Current Output DAC Chips?
No.
Patrick
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Group Buys
- Joachim Gerhard Filter Buffer for ES9022