Full Range Speaker Photo Gallery

Tornado system

Tornado system.
 

Attachments

  • P3210543.jpg
    P3210543.jpg
    502 KB · Views: 1,299
  • P8240780.jpg
    P8240780.jpg
    817.7 KB · Views: 1,283
Finally (!) made my cabinets pretty after listening to them for a few months.

Front and top are finished with some nice panelling from a company a family member works for, and the sides were done with two applications of linseed oil and then a darkened hard wax - makes birch ply look very premium!
 

Attachments

  • IMG_1305.jpg
    IMG_1305.jpg
    765.8 KB · Views: 1,218
  • E1D9BA24-08B1-4B01-A9C8-C19A79A89655.jpg
    E1D9BA24-08B1-4B01-A9C8-C19A79A89655.jpg
    252.9 KB · Views: 652
Got my wall-mounts all setup and sounding pretty good.

Using my miniDSP 4x10HD to tweak and control. Chromecast audio is connected via Optical and a little Dayton DTA-120 is the main amp. Nothing crazy.

There is a top-firing LD22 tweeter in each speaker. Running with a 4th order HP at 2.5k and a slight time delay.

The TB is running full-range with some EQ. Small suckout around 300 Hz to taste and added a lift centered around 55 Hz to counter the roll off in the small sealed box.

Was planning to add subwoofer but after more listening I think I'll be happy without. The driver seems to behave even at the volumes I use with the extra lift in the bass.

You'll see the couch in the picture, its a corner couch that wraps so you can sit and get a better on-axis sound. It also sends sound right into our kitchen, great for walking around upstairs and listening to music and podcasts.
 

Attachments

  • PSX_20210509_105344.jpg
    PSX_20210509_105344.jpg
    770.4 KB · Views: 444
  • PSX_20210509_105258.jpg
    PSX_20210509_105258.jpg
    642.1 KB · Views: 479
Last edited:
Thank you so much Dave and nandappe for guidance, as well as everyone else that contributed to helping me pick the right parts for this build. :) I learned a lot and they sound outstanding, even in my completely misshapen living room!

d6LUvltl.jpg

https://i.imgur.com/d6LUvlt.jpg

The drivers are Mark Audio MAOP 11's in a Pensil 11 case. I'm using an SMSL DA-9 amplifier connected to a HiFiBerry DAC+ Pro (soon to be a JDS Atom DAC) for sound.
 
Ah, ok.
It's quite a coincidence you happen to be playing with lone FR drivers in an OB at the same time as me, the last example I could find of it in this thread was from 2007!
There are probably some hidden in the OB thread though.

Maybe there are. I guess, a lot of people don't consider OB because of fundamental misconceptions or just a lack of knowledge or availability. Most if not all off-the-shelf drivers aren't bade for OB use. However, this doesn't mean, that they are not suited for OB. For my part, I just can't stand the sound of boxed speakers within the 80-500 Hz range. That's a matter of taste.

The Visaton WS line performs very well in OB applications. For this soundbar I used the WS13E which I had laying around. They get pretty loud and they play bass quite strong and noise-free despite of the small baffle size, no side wings, and the small x max.
 
Fully agree on that. What I (and the neighbours) cant stand are low bass room modes, open baffles are better in this regard but it is still a problem for small/medium sized rooms, accepting a reduction in low bass to avoid room modes and reaping the benefits of OB and single FRs is a fine compromise for me.
A closer listening position (1-2m) helps a huge deal with bass anyway and for an FR that is no problem.
 
Audio Nirvana Classic 8 in 75L bass reflex. corner placement + 8dB bass boost from 40-80Hz really help, no need for subwoofer on music duty. driven by SIT Vfet amplifier
 

Attachments

  • P_20210530_142542.jpg
    P_20210530_142542.jpg
    1 MB · Views: 907
  • P_20210530_142646.jpg
    P_20210530_142646.jpg
    736.8 KB · Views: 876
  • P_20210530_155350_1.jpg
    P_20210530_155350_1.jpg
    980.9 KB · Views: 474