Fostex 206 in 2.5 cubic foot box
Fostex recommend a 45 litre cabinet, so 2.5 cubic feet (approx. 70 litre) is much bigger. I think smaller would certainly be better.
Have a look at this http://www.tnt-audio.com/clinica/bfb_e.html
Fostex recommend a 45 litre cabinet, so 2.5 cubic feet (approx. 70 litre) is much bigger. I think smaller would certainly be better.
Have a look at this http://www.tnt-audio.com/clinica/bfb_e.html
Check out the cabinets on this site. They have one about the size of what you want. The porting they use is the key.
www.fostexspeakers.com
www.fostexspeakers.com
JimW said:
They would be boomy in the extreme.
In a sealed box that size, the speakers would be extremely over-damped.
You might be able to put some partitions in the box to turn it into a back horn. I don't know if they are a good size for that or not.
Assuming the inside height dimension is 22", you could put partitions in the box to turn it into a 44" tube. Add a 4" diameter port 6" long at the end, and you have a mass loaded transmission line. But it would have a 6 db shelf at about 300 Hz. To kill that, add 8 ohms series resistance. Use some polly fill stuffing, but not too close to the port. I did a quicky using Martin's worksheet. You can probably do better by tweeking around with it. See chart.
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.