portable bluetooth/wifi

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Last edited:
initial plan

This is what I have in mind, but the amp doesn't fit inside the middle tube any idea?
 

Attachments

  • DSC03215.JPG
    DSC03215.JPG
    286.8 KB · Views: 112
  • DSC03216.JPG
    DSC03216.JPG
    353.7 KB · Views: 115
Haven't documented this, but you get the idea. 4" plastic pipe with 2 passive radiators from ebay. In the middle section, I cut out a square piece away and fitted the wooden baffle for the active driver. That is Dayton Audio ND91. I'm using mono TPA3118 amp with separate BT-module, they fit in just fine.

Is the center section of your design smaller in diameter? If the amp is 85mm it should fit in 4" pipe?
 

Attachments

  • IMG_20181223_140307.jpg
    IMG_20181223_140307.jpg
    337.8 KB · Views: 101
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.