New Markaudio Drivers - Page 119

scottjoplin · 3rd December 2019, 08:11 AM

Quote:

Originally Posted by planet10

add a fancy braided sleeve and it looks like you could have bought it at the hifi shop

Which could well improve the sound

Octavia · 3rd December 2019, 08:17 PM

I have half a roll from the wiring harness of an MRI machine, seems to work pretty good, but not quite as easy to find as CAT5 which is pretty good too

McDark · 4th December 2019, 06:49 PM

@dave Thanks for posting CHN-110 data and box designs. Would you mind sharing F6/F3 values for CHN-110 Pensils please?

TimbreAudio · 6th December 2019, 12:40 PM

I finally have my router template copy jigs back from the cnc shop if anyone is interested in them. I need to take some pics but they have a cut out for the driver rebate and a shaped cut out for the magnet, Pilot holes too and reference marks for easy alignment. £20 plus p+p.

For the new 7’s or 11’s.
(Alpair 7ms, Pluvia 7’s or Alpair 11ms, Pluvia 11, others may work too)

4th December 2019, 06:49 PM	#1183
McDark diyAudio Member Join Date: Apr 2007	@dave Thanks for posting CHN-110 data and box designs. Would you mind sharing F6/F3 values for CHN-110 Pensils please? __________________ Yuri

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Zigmahornet with Markaudio drivers?	StevenZ	Full Range	13	26th May 2011 06:09 PM
FS: pair of MarkAudio CHR-70 drivers	albireo13	Swap Meet	5	30th November 2010 09:07 PM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd December 2019, 08:17 PM	#1182
Octavia diyAudio Member Join Date: Mar 2008	I have half a roll from the wiring harness of an MRI machine, seems to work pretty good, but not quite as easy to find as CAT5 which is pretty good too

6th December 2019, 12:40 PM	#1184
TimbreAudio diyAudio Member Join Date: Dec 2016	I finally have my router template copy jigs back from the cnc shop if anyone is interested in them. I need to take some pics but they have a cut out for the driver rebate and a shaped cut out for the magnet, Pilot holes too and reference marks for easy alignment. £20 plus p+p. For the new 7’s or 11’s. (Alpair 7ms, Pluvia 7’s or Alpair 11ms, Pluvia 11, others may work too)