Eikona 2 18 MLTL and Ecosheet

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.

GM

Member
Joined 2003
I can however, get plenty of Ecosheet from a local supplier.

Greets!

Just converting specs, 700 mpa MOE = ~101.5 k psi compared to 3/4" mdf's ~528 k psi and 19 mm BB, apple, marine no-void plywood's ~1.8 m psi, so relatively speaking, this is flimsy insulation board, which would work fine for damping high Qts drivers or for enclosing/damping a horn or [super] tweeter, but otherwise to be avoided unless there's nothing else any stiffer.

GM
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.