BK-16 Folder Horn - Change Dimensions

[slhijb]

Considering building the BK-16 folded horn. This is my first diy horn. Looking at making the cabinets a little slimmer and taller, by an inch or two. Will compensate for reductions in the cabinet widths with height increases. The Vb won’t change and area openings of the throats & mouths will remain the same; however, the mouth opening dimensions will change a bit. Is this OK?

 

[zobsky]

Considering building the BK-16 folded horn. This is my first diy horn. Looking at making the cabinets a little slimmer and taller, by an inch or two. Will compensate for reductions in the cabinet widths with height increases. The Vb won’t change and area openings of the throats & mouths will remain the same; however, the mouth opening dimensions will change a bit. Is this OK?

To be honest, look for another design. From memory, the horn path is a bit too short.

 

[planet10]

Not really. The cross-sections and length of the horn need to remain the same.

What driver are you intending to use?

dave

 

[Godzilla]

ZillaSpeak - Speakers

I built these years ago and thought they had a hollow sound. But they did have a dynamic sound too which got me interested in back horns.

Godzilla

 

[slhijb]

Thanks for the responses. Dave, looking at using the Madisound recommended Fostex FF165K.

 

[planet10]

That driver should work in almost all the FE166 enclosures. Hiro or A166 top of the list.

dave

 

[slhijb]

Dave, thanks again. You sparked my interest with the Austin A166s. Some folks apparently use the FE168ES with it. A good choice? Also, are you aware of any more recent plans available for it?

 

[planet10]

Some guys (Chad in particular (aka HiFiZen)) have been working on getting the plans redone