Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Horn mouth venting to the floor
Horn mouth venting to the floor
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 21st February 2008, 05:50 PM   #1
Tyimo is offline Tyimo  Hungary
diyAudio Member
 
Join Date: Nov 2002
Location: Hungary
Default Horn mouth venting to the floor

Hi!
How could we calculate-model-simulate a BLH, where the mouth is located (opened) to the floor??
I know in this situation the floor and the side wall and back wall, these junctions become part of the mouth, but I don't know how big is this influence for the "classic" way calculated horn lenght and size.
How could I calculate such a horn with MJK's program?

Greets:

Tyimo
  Reply With Quote
Old 21st February 2008, 09:58 PM   #2
jnb is offline jnb  Australia
diyAudio Member
 
Join Date: Dec 2006
If it were sitting on a floor with no nearby walls, it would be radiating into half-space. This can be calulated in Hornresp, not sure about MJKs sheets.
  Reply With Quote
Old 21st February 2008, 10:03 PM   #3
Harderror is offline Harderror  United States
diyAudio Member
 
Harderror's Avatar
 
Join Date: Mar 2006
Location: Washington DC
Remember though, if it is firing straight at the floor, you will run in to reflected waves running back up the horn. NOT GOOD. This will cause smear and cancellation like you have never thought possible. Firing at the floor seems like it won't be a good idea, period. Why would you want to fire at the floor anyway? Just curious.

Tom
  Reply With Quote
Old 21st February 2008, 10:21 PM   #4
Kim Bay Smidt is offline Kim Bay Smidt  Denmark
diyAudio Member
 
Kim Bay Smidt's Avatar
 
Join Date: Nov 2004
Location: Aarhus, Denmark
Check Bruce Edgars Seismic Horn sub at 6moons.com: 6moons

Horn mouth venting to the floor
  Reply With Quote
Old 21st February 2008, 11:11 PM   #5
ronc is offline ronc  United States
diyAudio Member
 
Join Date: Mar 2003
With the internal deflector in place its not firing at the floor but produces a 360 degree radiation pattern.

ron
  Reply With Quote
Old 22nd February 2008, 05:17 AM   #6
Tyimo is offline Tyimo  Hungary
diyAudio Member
 
Join Date: Nov 2002
Location: Hungary
Quote:
Remember though, if it is firing straight at the floor, you will run in to reflected waves running back up the horn. NOT GOOD. This will cause smear and cancellation like you have never thought possible. Firing at the floor seems like it won't be a good idea, period. Why would you want to fire at the floor anyway? Just curious.
Tom!
Yes, theoretically you "could" have true, but in the reality it works very well! Listen to the Impulse loudspeakers!

Ron has true: with (and without!) the internal deflector in place its not firing at the floor but produces a 360 degree radiation pattern. You could imagine like the hornmouth is located near the floor and opened along the 4 sides of the cabinet.

I wouldn't like to open a discourse about why is it good or not, rather I would like to concentrate for the calculating-modeling solutions.

Tyimo
Attached Images
File Type: jpg impulse.jpg (24.3 KB, 250 views)
  Reply With Quote
Old 22nd February 2008, 06:59 AM   #7
Tyimo is offline Tyimo  Hungary
diyAudio Member
 
Join Date: Nov 2002
Location: Hungary
The bottom-firing horn, a technique elegantly deployed by among others Dr. Bruce Edgar in his "Monolith Horn". This is potentially a very effective approach, in that it wraps the mouth around two or more sides of the cabinet. For the bottom-firing horn, we can easily obtain a very large mouth opening by wrapping the mouth around four sides (both sides and front and rear), and mounting the horn on stands of appropriate height. We'd need stands of just enough cm height to obtain the same mouth area.

Greets:

Tyimo
  Reply With Quote
Old 22nd February 2008, 06:31 PM   #8
Tyimo is offline Tyimo  Hungary
diyAudio Member
 
Join Date: Nov 2002
Location: Hungary
Dave?!?
Scott?!?
Martin?!?
  Reply With Quote
Old 22nd February 2008, 06:53 PM   #9
Scottmoose is offline Scottmoose  United Kingdom
diyAudio Member
 
Scottmoose's Avatar
 
Join Date: Mar 2005
Location: UK
I'd just model it in MJKs BLH Sections sheet or hornresp as best you can. Job's a good 'un (or as close as you're likely to get).
__________________
"'That'll do", comes the cry of the perfectionist down the ages.' James May -The Reassembler
www.wodendesign.com Community sites www.frugal-horn.com http://frugal-phile.com/
  Reply With Quote

Reply


Horn mouth venting to the floorHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Horn mouth bubble size MaVo Subwoofers 1 25th February 2009 11:59 AM
Horn Mouth Diffraction mefistofelez Multi-Way 11 14th October 2005 01:04 AM
rear horn mouth area big_kahunah Full Range 1 16th August 2005 01:35 AM
Screen in horn mouth? Stocker Multi-Way 7 9th March 2005 09:39 AM
Horn speaker w/variable throat & mouth bbaker6212 Multi-Way 1 1st August 2003 07:27 AM


New To Site? Need Help?

All times are GMT. The time now is 02:41 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki