New project actually started ;)

[inrank]

well i decided on a plan, and saw these bowls in Ikea, decided to buy 4 to make two spheres for my little Bandor drivers, they are 20cm in diameter and around 2-3L'ish, need to make them a little smaller, and mount the drivers on a disk to make it easier to mount onto the sphere.

Ta

 

[Harderror]

Ikea Hacking is fun. My stereo cabinet is ikea hacked, in fact many things in my house started out as Ikea stuff. Go check out http://ikeahacker.blogspot.com/ it is a place for people who love hacking Ikea stuff. Can't be beat!

Tom

 

[inrank]

got the cabinets done today -

An externally hosted image should be here but it was not working when we last tested it.

hopefully get them all hooked up by this evening

with blue modeling foam for a quick base/support

An externally hosted image should be here but it was not working when we last tested it.

 

[Jeb-D.]

I have a pair of drivers I've been considering doing that with. If you find the internal volume let us know. You could use a measuring cup to fill the bowl with water to get a more accurate idea than 2-3L.

Interesting build, keep us posted!

 

[inrank]

got them hooked up

i will wax lyrical about these later, they sounded good in cardboard boxes, now, well just amazing really

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

 

[ßart West-VL.]

Great! Good job
How would you finish them?Will you round over the edge of the baffle?
Can you measure the response and maybe measure the response from one in a cardboard box too, or an old cabinet with temporary baffle? To compare.

I'm following your work‼

 

[inrank]

not sure how i am going to finish them, was thinking of some felt or similar for the small baffle, but its not going to be done soon, got loads of work on at the moment

i dont have any equipment for measuring the FR, would be interesting to see the difference though