diyAudio (
-   exaDevices (
-   -   exaU2I - Multi-Channel Asynchronous USB to I2S Interface (

aradan 22nd March 2020 10:41 AM

It is very strange but after installing JRiver everything picked up the drier.

Foobar with Asio Plug in, etc.

However I needed to reset windows before that happened may be something is clashing with the drivers.

Installed drivers normally without any safe modes

johnmarkp 22nd March 2020 01:23 PM

Does Windows itself recognize the driver under audio devices. I have never been able to get that to work. I am trying to get Tidal to work with the Exa.

aradan 22nd March 2020 02:15 PM

Windows has introduced a restriction not to allow to use unsigned drivers.

If the driver is not signed it wont be used.

I understand that with exa this is the case.

Exa drivers are not signed. The installer might be xopying the files, but windows might be ignoring them because of lack of signature thats what I have seen in my first attempt.

Looks like jriver unlocks the direct access to exa and than it worked fine.

Thats my theory. Another way to try is to install a driver in the unsigned mode.

All times are GMT. The time now is 09:56 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio