Hi I am new to this community and plan to build my first pair of speakers soon and just need a ton of help. This build will most likely be 1 of 2 build I want to do, both will be 3 way builds without crossovers. My plan is to get a hivi 3.1 kit to practice on with the dsp, learning what I can then build my second pair with what I learned. Kinda feel stupid asking these questions but at this point I am desperate to learn and try!
Q1: How are crossover less or dsp speakers wired? Do they still need internal circuits?
Q2: How do you match speakers in a 3 way build.
Q3: what determines how much power goes to each speaker.
Any links, advice or book recommendations are welcomed.
Thanks in advance.
Akil.
Q1: How are crossover less or dsp speakers wired? Do they still need internal circuits?
Q2: How do you match speakers in a 3 way build.
Q3: what determines how much power goes to each speaker.
Any links, advice or book recommendations are welcomed.
Thanks in advance.
Akil.
Going DSP/Digital doesn't remove the laws of physics from loudspeaker design. The basic considerations of good loudspeaker design still apply.
HiFi Loudspeaker Design
Resources - Build A Speaker
So you want to design your own speaker from scratch!
HiFi Loudspeaker Design
Resources - Build A Speaker
So you want to design your own speaker from scratch!
Don't forget this one:
Elliott Sound Products - The Audio Pages (Main Index)
Much valuable information. There is a frequency / power chart.
Check why tweeters blow section.
Elliott Sound Products - The Audio Pages (Main Index)
Much valuable information. There is a frequency / power chart.
Check why tweeters blow section.
There is a site dedicated to active speakers at Audiodevelopers Reborn – A collaborative website for active speaker design that might be useful.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.