As you may know, I'm researching around parabolic speakers and did a survey around my first prototype (see https://www.diyaudio.com/forums/planars-and-exotics/352353-project-parabolic-speaker.html).
As I'm going deeper in the survey, people ask to be able to mount the parabolic speaker easily on various supports (floor support, desk support, hanging, etc.).
As for lights there are light bulbs that you can hold & plug to electricity in one system (screw or bayonet), is there such system for audio that fix pieces together and ensure sound signal is passing through?
If not, is there any usage that you would think it could be useful as well (so that I design it accordingly)?
As I'm going deeper in the survey, people ask to be able to mount the parabolic speaker easily on various supports (floor support, desk support, hanging, etc.).
As for lights there are light bulbs that you can hold & plug to electricity in one system (screw or bayonet), is there such system for audio that fix pieces together and ensure sound signal is passing through?
If not, is there any usage that you would think it could be useful as well (so that I design it accordingly)?
Speakon connectors are widely used in the PA industry
https://www.neutrik.com/en/neutrik/products/speakon-loudspeaker-connectors/speakon-cable-connectors
Just search for a supplier close to you
cheers
https://www.neutrik.com/en/neutrik/products/speakon-loudspeaker-connectors/speakon-cable-connectors
Just search for a supplier close to you
cheers
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Everything Else
- How to assemble together and pass sound through in one system