Full details are at
http://www.tnt-audio.com/clinica/ttse.html
http://www.tnt-audio.com/clinica/tts2e.html
http://www.tnt-audio.com/clinica/tts3e.html
Cable originally specified was Pirelli Screenflex S2 featuring the double shield (aluminium foil + copper braid) and two 1.5 sq.mm stranded copper conductors. People found it difficult to obtain this so Baldassari cable a single shield only was later recommended. But this cable is also not available now.
Now there is a cable that is better than both! Should be perfect for making TNT TripleT, which is claimed to be much superior to TNT Merlino.
Two 12-gauge conductors, Teflon insulation with double foil/braid shield.
Three of these braided together for the TTS would carry some power!!
An externally hosted image should be here but it was not working when we last tested it.
Belden 83802
Number of Conductors: 2
AWG: 12. Stranding: 7x20, Conductor Material: TC - Tinned Copper
Insulation Material : Teflon® (FEP - Fluorinated Ethylene Propylene)
Outer Shield Material : Aluminum Foil-Polyester Tape/TC & Tinned Copper (Beldfoil®)
Outer Shield Coverage: 100%
Outer Jacket Material : Teflon® (Fluorinated Ethylene Propylene)
300Volt, 25 Amp
Overall Nominal Diameter: 0.303 inch
TakeFiveAudio.com (Canada) are advertising at C$3.55 a foot - C$2.99 a foot if you buy 100 feet.
An externally hosted image should be here but it was not working when we last tested it.
Finish off with a Micromark Multi-Way Mains Plug
http://www.tnt-audio.com/clinica/hydra_e.html
Available from Maplin. Part No VD02C