Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Deeply discharged car battery - basic questions (no charger around).
Deeply discharged car battery - basic questions (no charger around).
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 29th November 2018, 10:11 AM   #41
avtech23 is offline avtech23  Australia
Certifiably addicted to DIY.
diyAudio Member
 
avtech23's Avatar
 
Join Date: Dec 2017
Location: South 'straya
Deeply discharged car battery - basic questions (no charger around).
There was an interesting piece on this in Popular Mechanics almost a decade ago:

Whatever Happened to the 42-Volt Car?
__________________
The ever growing project list.. :NAP140 Clone, NAD 3020i & 3225PE, JLH1969, TDA2050, Fender 5F2A Princeton, NE5532 Preamp | : VSQC Phunk Style, Retro 50W | : Apex AX-14 | SHPA | TGM-10 | TDA7265 (Last in line)...maybe
  Reply With Quote
Old 29th November 2018, 02:05 PM   #42
kevinahcc20 is offline kevinahcc20  United States
diyAudio Member
 
kevinahcc20's Avatar
 
Join Date: Apr 2009
Location: Farmington Hills, MI USA
There have been two major changes in mainstream automotive electrical systems in 125 years. Around 1920 the advent and spread of the self starter required a battery for starting and the early hand-crank started (where the term "crank the engine" originated) magneto based ignition system faded away replaced by a 6 volt lead acid battery and DC generator electrical system. This then supported the adoption of electric lighting, horns, radios and other electrical accessories.

By the mid-1950s the transition to higher compression engines was the primary driver to the adoption of the 12 volt system that remains today, as the cranking current demanded of 6 volt starter motors became excessive. In the 1960s the DC generator was replaced by an AC alternator with rectifying diodes allowing for much higher charging rates. Again as the system was upgraded it facilitated broader adoption of electric powered accessories like power windows, seat adjusters, and door locks.

This system with refinements has survived through the transformation of the motor vehicle, first driven in the early 1980s by emissions and safety (airbag controller) regulations, into a networked environment of many microprocessors. So the lesson of history is that a major change to automotive electrical system standards requires a prime driver to justify it. Wholesale adoption of hybrid drive systems would be the best candidate to prompt the adoption of a higher system voltage but so far that has been a niche application that has left conventional vehicle electrical architectures in place.

One factor that the current 12V lead acid battery has in its favor is that it is one of the most efficiently recycled commodities in existence. This dense and easily handled brick that is primarily lead by weight sees about 90% efficient reuse of spent batteries.
__________________
Kevin(ahcc20)...I'd rather have a bottle in front of me than a frontal lobotomy!
  Reply With Quote
Old 6th December 2018, 05:01 PM   #43
academia50 is offline academia50  Argentina
diyAudio Member
 
Join Date: Jan 2013
Quote:
Originally Posted by kevinahcc20 View Post
................
In the 1960s the DC generator was replaced by an AC alternator with rectifying diodes allowing for much higher charging rates. Again as the system was upgraded it facilitated broader adoption of electric powered accessories like power windows, seat adjusters, and door locks.............

.

Just add something:

The dynamo did not load at low revolutions of the engine because obviously it was coupled to it and depended on those RPM, typically I remember that there was not enough current below the revolutions of idle (800 rpm) Then, the most important advance brought by the emergence of the altenator, is that it supplies load current even at low RPM. The rectification in the dynamo was made by the commutation between the coals and the delgas, when acting on the concatenated flow in each cycle or rotation, this process was successfully replaced by the diode bridge.
The other important advance long before the massive incorporation of the electronic ignition was the replacement of the electromechanical voltage regulator by the solid-state voltage regulator.
  Reply With Quote
Old 6th December 2018, 10:31 PM   #44
martin clark is offline martin clark  Europe
diyAudio Member
 
Join Date: Jul 2003
Location: Bath, UK
The real advantage of the alternator in no small part due to the solid-state side of rectification and regulation was the fundamental change of operation -

1. the non-mech commutation allowed instead for the rotor to provide/control the magnetic field, and the stator to supply heavy output currents that do not need to pass through slip-rings/ a commutator (massive win); and so

2. as a result - simple regulation of a low current via slip rings to the rotor to provide the field magnetism. This current is still often at most only 4-5A, so lifespan was also massively improved.

A simply brilliant inversion, that also allows the control of rotor mag field (= generated output power) nearly-independent of input rpm. Hence - ramp the field current right up at low speed and you can draw a significant proportion of full-rated output current, often 70-ish% + even at engine idle. It made the 'generator' a near- constant-power device, rather than only the constant-voltage device a dynamo could be. That's the big step forward.

Interesting side diversion - this also means the drive torque to an alternator to deliver its rated power also drops off markedly as revs rise. Strange but true.

Last edited by martin clark; 6th December 2018 at 10:34 PM.
  Reply With Quote
Old 8th December 2018, 03:35 AM   #45
academia50 is offline academia50  Argentina
diyAudio Member
 
Join Date: Jan 2013
Quote:
Originally Posted by martin clark View Post
The real advantage of the alternator in no small part due to the solid-state side of rectification and regulation was the fundamental change of operation -

1. the non-mech commutation allowed instead for the rotor to provide/control the magnetic field, and the stator to supply heavy output currents that do not need to pass through slip-rings/ a commutator (massive win); and so

2. as a result - simple regulation of a low current via slip rings to the rotor to provide the field magnetism. This current is still often at most only 4-5A, so lifespan was also massively improved.

A simply brilliant inversion, that also allows the control of rotor mag field (= generated output power) nearly-independent of input rpm. Hence - ramp the field current right up at low speed and you can draw a significant proportion of full-rated output current, often 70-ish% + even at engine idle. It made the 'generator' a near- constant-power device, rather than only the constant-voltage device a dynamo could be. That's the big step forward.

Interesting side diversion - this also means the drive torque to an alternator to deliver its rated power also drops off markedly as revs rise. Strange but true.


Words more, words less, you say the same as me, then delete the real word. Just that I do not master English, try the reverse, explain it to me in Spanish .....

Last edited by academia50; 8th December 2018 at 03:42 AM.
  Reply With Quote

Reply


Deeply discharged car battery - basic questions (no charger around).Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Battery Charger Questions JhonDoe Power Supplies 5 15th February 2010 09:08 AM
Battery Charger for 15V Li-ION Battery Pack ??? Jan Dupont Parts 2 11th April 2009 03:18 PM
R/C battery and charger jaudio Power Supplies 3 18th February 2009 08:27 PM
12V Battery Charger for Car Wynand Everything Else 10 16th November 2006 12:25 AM
Battery Charger ThSpeakerDude88 Everything Else 13 6th September 2006 11:40 PM


New To Site? Need Help?

All times are GMT. The time now is 12:24 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki