Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Everything Else Anything related to audio / video / electronics etc) BUT remember- we have many new forums where your thread may now fit! .... Parts, Equipment & Tools, Construction Tips, Software Tools......

Schumann Resonator Coil
Schumann Resonator Coil
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 8th December 2013, 09:25 PM   #1
cncdragon is offline cncdragon  Ireland
diyAudio Member
 
Join Date: Nov 2013
Default Schumann Resonator Coil

Hi all, I've been looking at the various threads on here about building a Schumann Resonator http://www.diyaudio.com/forums/every...resonator.html and Schumann Resonator I would like to build one of these and was just wondering if someone could advise me in regard to the PCB etched coil. On looking here and on the net there appear to be many different designs, all using a bifilar coil, some square and others angled eg. octagon shape. My question is basically, what is likely to be the best size and shape coil to be most effective, or is there really much difference between them ? Also how would one calculate the correct trace width, distance and turns to have an effective coil ? Finally, could someone advise as to the best method to create a bifilar coil in EagleCad. I'm familiar with the print-spiral ULP but perhaps there is a ULP that can handle a bifiliar coil ? Many thanks to any who can advise here.
  Reply With Quote
Old 8th December 2013, 10:12 PM   #2
DUG is offline DUG  Canada
diyAudio Member
 
Join Date: Jan 2003
Location: mississauga ontario canada
Make one coil on the top layer and the electrostatic shield on the bottom.

Then make another one the same.

Insulate the coil area except for the connector pins.

Join at the 7 pin connector top face to top face.

Center tap is pin 1 and the two feeds are pins 2 and 3.

The shield is 6 and 7.

Works very well.

I could tell you where I've used this, but...

Attached Images
File Type: jpg LOOP_ANT.JPG (163.9 KB, 108 views)
__________________
Doug We are all learning...we can all help
"You can't stop the signal, Mal. Everything goes somewhere..."
  Reply With Quote
Old 9th December 2013, 04:02 PM   #3
cncdragon is offline cncdragon  Ireland
diyAudio Member
 
Join Date: Nov 2013
Thanks Dug ! Much appreciated. So is this the best shape for radiating in the 7.8hz region or are they all fairly similar ? Also what would be the best dimensions in terms of trace width and distance ? Thanks again.
  Reply With Quote

Reply


Schumann Resonator CoilHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY Schumann resonator? protos Construction Tips 239 23rd October 2017 09:27 AM
Schumann Resonator hyperblaster89 Everything Else 22 10th December 2013 05:30 AM
Resonator guitars PhaseLockLoopy Instruments and Amps 3 30th May 2008 04:28 PM
Horn-Resonator? TroelsM Multi-Way 5 29th September 2005 02:23 PM
isobaric resonator? tade Subwoofers 6 17th August 2005 07:24 AM


New To Site? Need Help?

All times are GMT. The time now is 05:16 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio
Wiki