Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Equipment & Tools From test equipment to hand tools

Circuit board protection from the elements
Circuit board protection from the elements
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 16th October 2019, 04:41 PM   #1
Hayden is offline Hayden  Australia
diyAudio Member
 
Join Date: Aug 2004
Location: Mackay Australia
Default Circuit board protection from the elements

I have some led strips that I want to protect and thought of spraying them with circuit board lacquer as being for circuit boards it wouldn’t corrode and protect it that bit better… right?
I have a lot of strips that are the weather proof ones like silicon coated but as you can see in the photo the silicon goes brown after awhile and the copper tracks start to corrode.
Some of the leds are ws2812 and they go dark under the silicon and sometimes fail. Now is that due to the silicon being acidic or something?
Just wondering if I get the non-weatherproof the raw strips and spray them with circuit board lacquer would I get better lifespan?

Any thoughts on this? anything better?
Thanks so much
[IMG]Click the image to open in full size.[/IMG]
[IMG]Click the image to open in full size.[/IMG]
  Reply With Quote
Old 16th October 2019, 04:54 PM   #2
Osvaldo de Banfield is online now Osvaldo de Banfield  Argentina
diyAudio Member
 
Osvaldo de Banfield's Avatar
 
Join Date: Dec 2011
Location: Barrio Garay,Almirante Brown, Buenos Aires, Argentina
Depends on climate and use. I saw several industrial devices in which the lacquer became conductive with high voltages available in such a power devices, and caused an important explosion, and difficulting the repairment of them.
__________________
Osvaldo F. Zappacosta. Electronic Engineer UTN FRA from 2001.
Argentine Ham Radio LW1DSE since 1987.
  Reply With Quote
Old 16th October 2019, 05:51 PM   #3
JonSnell Electronic is online now JonSnell Electronic  United Kingdom
diyAudio Member
 
JonSnell Electronic's Avatar
 
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
This is what I have and most of industry uses.
It does not attract moisture and definitely does not get conductive with age.
It washes off with acetone or IPA.
ERDCEO.75L | Electrolube Clear 0.75 L Can Conformal Coating for Protect Printed Circuit Boards | RS Components
__________________
Support for Fender, Marshall and all Valve Equipment; Audio Innovations, Audiorama FU29, Quad and Leak. www.jonsnell.co.uk
  Reply With Quote
Old 21st October 2019, 04:47 PM   #4
Mark Tillotson is offline Mark Tillotson
diyAudio Member
 
Join Date: May 2018
Location: Cambridge UK
You mean silicone, not silicon - quite a difference! I suspect its UV light damage causing discolouration, and this style of LED strip isn't weatherproof at all. I've some old LED strip left on a reel that's starting to craze with age (not discoloured as its been on the reel away from sunlight).


Turns out this stuff isn't very durable - though this may have improved.


To protect against UV needs a coating designed for the purpose, not just a regular conformal coating, I suspect.
  Reply With Quote
Old 22nd October 2019, 06:00 PM   #5
RJM1 is offline RJM1  United States
diyAudio Member
 
Join Date: Jan 2010
Location: Titusville, Fl.
You might want to look here.
The Essential Guide to Conformal Coating | Techspray
  Reply With Quote

Reply


Circuit board protection from the elementsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
vintage amplifier circuit board with TDA2010 with this tone/volume control circuit Peters8 Chip Amps 16 4th March 2018 08:17 PM
Designing an amp protection board sevenup2278 Solid State 8 6th January 2013 09:08 AM
WLX-7 Speaker protection board UV101 Solid State 5 19th October 2012 10:27 AM
TA7317 protection board Burnedfingers Solid State 57 20th April 2010 10:55 PM
Trouble with speaker protection circuit (Randy Slone's circuit) whalefat Solid State 3 13th April 2005 11:13 AM


New To Site? Need Help?

All times are GMT. The time now is 05:02 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki