Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Equipment & Tools From test equipment to hand tools

My Fluke 85 died!
My Fluke 85 died!
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 18th January 2016, 12:05 PM   #1
Sprags is offline Sprags  United States
diyAudio Member
 
Join Date: Mar 2013
Location: Elgin,illinois
Default My Fluke 85 died!

I've had this baby since the early 90's. I'm not an electronics guy so the extent of my use of this DMM has been to check voltage at the various outlets of my house that I bought last June and biasing my amp. The last time I used it the readings seemed to be 'odd' in that it was reading high with the bias pot turned all the down until it got close to the number I wanted to and then it would then be reading ok for the last 20 seconds while fine tuning the adjustment. I figured it was due to the house wiring because if saw the way things were wired in this house you'd understand. I did have it inspected by an expert electrician I know before purchasing so the house is safe...just weird.

Anyway...I finally decided to try out a new set of tubes so I broke out the DMM. It wouldn't power on so i put a new battery in. Still nothing. So...I'm in the market for a new one. I don't want to spent $400. I was hoping somewhere between $50 and $100. But if a lesser expensive Fluke is still the way to go I'd spring for a 113 or 117.

Suggestions please? Thank you. Blake
  Reply With Quote
Old 18th January 2016, 12:14 PM   #2
JonSnell Electronic is offline JonSnell Electronic  United Kingdom
diyAudio Member
 
JonSnell Electronic's Avatar
 
Join Date: Dec 2012
Location: The Jurassic Coast, England. GB
There is a vast choice on ebay.
fluke digital multimeter in Electrical and Test Equipment | eBay
__________________
Support for Fender, Marshall and all Valve Equipment; Audio Innovations, Audiorama FU29, Quad and Leak. www.jonsnell.co.uk
  Reply With Quote
Old 18th January 2016, 12:52 PM   #3
simon7000 is offline simon7000  United States
diyAudio Member
 
Join Date: Nov 2008
Location: Oakmont PA
Be sure to sell your old one on eBay as broken for parts or repair. There are folks who who will buy it and often repair and resell it.
  Reply With Quote
Old 18th January 2016, 01:06 PM   #4
djoffe is offline djoffe  United States
diyAudio Member
 
Join Date: Oct 2008
The radio shack meters aren't bad...for example:

https://www.radioshack.com/products/...ant=5717078789

Akitika Preamp and Power Amp Kits

Update My Dynaco
  Reply With Quote
Old 20th January 2016, 06:57 PM   #5
retiredcaps is offline retiredcaps  Canada
diyAudio Member
 
Join Date: Apr 2012
@Sprags

If you would like suggestions on how to fix your Fluke 85, I can provide some assuming you have another working meter to take measurements.

PS. You should never need to adjust the calibration pot on a Fluke 80 series. You may have had an "oops" moment where you had the multimeter on ohms while measuring very high voltage?

Last edited by retiredcaps; 20th January 2016 at 07:02 PM.
  Reply With Quote
Old 21st January 2016, 12:39 AM   #6
Sprags is offline Sprags  United States
diyAudio Member
 
Join Date: Mar 2013
Location: Elgin,illinois
To be honest I'm not sure why it doesn't work but I'd like fix it if you can help me out with instructions. I really want to get my tube amp going so I splurged on a DMM from HomeDepot.

I'm going to be building a Tubelab SSE soon and its suggested it would make working on it easier if I had more than one DMM....so if I can get my Fluke 85 running again that will be a good thing.
  Reply With Quote
Old 21st January 2016, 03:52 AM   #7
retiredcaps is offline retiredcaps  Canada
diyAudio Member
 
Join Date: Apr 2012
To troubleshoot, first download the Fluke 85 service manual.

http://assets.fluke.com/manuals/83_85_87smeng0500.pdf

Then look at table 3-14 and report your voltage measurements for each test point/parameter (i.e. VDD, VSS, etc). Use the schematics and circuit diagram to find each test point/parameter.

Report your findings for each one. If you get 0V for all of them, it could be a simple battery connector problem?

A case study in a dead Fluke 83 by modemhead ...

http://mrmodemhead.com/blog/fluke-83-dmm-repair/

"This example arrives without its usual yellow holster and is completely dead. No display at all."

Last edited by retiredcaps; 21st January 2016 at 04:02 AM.
  Reply With Quote
Old 21st January 2016, 04:04 AM   #8
retiredcaps is offline retiredcaps  Canada
diyAudio Member
 
Join Date: Apr 2012
Quote:
Originally Posted by Sprags View Post
I really want to get my tube amp going so I splurged on a DMM from HomeDepot.
What did you end up buying?
  Reply With Quote

Reply


My Fluke 85 died!Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Linn lk-85 BIA Chip Amps 4 25th November 2013 11:25 PM
FE-85 final report tvrgeek Full Range 0 9th February 2013 04:19 PM
criterion 85-es sdad Planars & Exotics 20 28th March 2011 12:22 PM
Looking for Yamaha T-85 Service Manual stef1777 Analogue Source 0 13th April 2005 10:03 AM
ECC81 or 83 or 85 or 88 ??? Bernhard Tubes / Valves 1 26th December 2003 03:57 PM


New To Site? Need Help?

All times are GMT. The time now is 01:36 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki