Go Back   Home > Forums > > >

Elektor News and offers from Elektor Magazine

Reply
 
Thread Tools
Old 29th December 2020, 06:30 PM   #1
oodi is offline oodi  Canada
diyAudio Member
 
Join Date: Jan 2006
Location: Sioux Lookout, Ontario
Default Mini Crescendo worth reviving?

I am finally getting back into audio gear. Raising kids has life go off in different directions? Back in 1984 I built the Mini Crescendo from Elektor plans but my own board layout. I built it in Germany before my move to Canada. It was last powered on around 1998. The toroid on the build is a 220V type which wont work too well on our 110V here.

Question, if I picked up a new Hammond Mfg transformer I am stuck choosing the 60V or 80V Center Tapped. I am leaning towards 2x30V. Considering itll be over $100 and the filter caps also need replacing I am wondering if this venture is even worth it?

Adi
  Reply With Quote
Old 29th December 2020, 06:41 PM   #2
Mooly is offline Mooly  United Kingdom
diyAudio Moderator
 
Mooly's Avatar
 
Join Date: Sep 2007
Mini Crescendo worth reviving?
If it doesn't work out then the 30-0-30 transformer could be used for something else such as an LM3886 based amp (edit... a bit marginal perhaps for an LM3886 but there are lots of other designs). I wouldn't go any higher voltage wise.

The reservoir caps might be old but that doesn't mean they are no good. I would use a DBT (dim bulb tester) for initial powering up and do a quick check that the DC offset is zero at the speaker terminals.

A 220v 50Hz transformer on 110 volts 60Hz should work without issue... give it whirl... a low powered Micro Mini Crescendo.
  Reply to this post

Reply


Mini Crescendo worth reviving?Hide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
the (in-) famous mini-Crescendo by elektor Mr. Triatic Solid State 5 21st April 2016 08:57 PM
Helps/opinions needed before renewing my old Mini Crescendo amp Cruzs Solid State 3 15th October 2008 08:25 PM
Mini Crescendo article carlhemm Solid State 6 4th December 2006 04:37 PM
Will Mini Crescendo be loud enough? LightHaMMer Solid State 2 8th June 2004 07:23 AM
biasing up the mini-crescendo kind of construction.. Mr. Triatic Solid State 3 22nd July 2002 03:16 PM


New To Site? Need Help?

All times are GMT. The time now is 10:35 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio
Wiki