Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Elektor News and offers from Elektor Magazine

Reply
 
Thread Tools Search this Thread
Old 27th May 2019, 04:55 AM   #1
phri is offline phri  Australia
diyAudio Member
 
Join Date: Mar 2019
Location: close to melbourne
Default elktor preamp prelude march 1983

Currently I am trying to getting some of my old builds in action again. Back in 1984 I build a pre-amp based on the line amp (and MC) of the original prelude.
btw, I avoided the other overly complicated printboards of this design.



The line amp in a discrete build opamp see attachment. Back then I replaced the input electrolytic capacitors with MKT types and removed the output elco completely. I included a small circuit to adjust offset on the output manually.


While the sound of the unit is fairly good in my ears it has been build with standard none-audio grade parts, inclusive a big electrolytic capacitor in the feed back line. And of course it's a very old design.


Would it be worth it to try to improve the pre-amp? Could I use an auto offset correction as implemented in the crescendo millennium? (if yes how?)
Any ideas which other changes would give me a worthy sound improvement?

I don't mind spending some $$$ but don't want to go over the top (like 2 X 220 uF foil capacitors).
Attached Images
File Type: jpg preludio.JPG (50.6 KB, 98 views)
  Reply With Quote
Old 28th May 2019, 03:51 AM   #2
phri is offline phri  Australia
diyAudio Member
 
Join Date: Mar 2019
Location: close to melbourne
I also want to lower the gain of this pre-amp as this is now 22x


The ratio of R4 and R3 determine gain. I want to roughly halve the gain. Easiest way seems to be lowering R4 from 68K to 34K. However not sure if I have to change Cx Any feedback?
  Reply With Quote
Old 9th July 2019, 06:22 AM   #3
Kay Pirinha is offline Kay Pirinha  Germany
diyAudio Member
 
Kay Pirinha's Avatar
 
Join Date: Oct 2011
Location: Somewhere in Germany
Sorry for the delay. I've just seen your question.
I've also built this preamp in the 1980ies and yes, the line amp's gain is waaay too big. If you change R4 for 33k, gain will be 11x. Cx roughly has to be doubled (22p -> 47p) then. To get best results, this capacitor hat to be determined, using a square wave generator and an o'scope.
Good luck!
__________________
"Bless you, Sister. May all your sons be bishops." (Brendan Behan)
  Reply With Quote

Reply


elktor preamp prelude march 1983Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Black Rhodium Prelude Cable Clearance mainscablesrus Mains Cables R Us 0 30th April 2017 09:27 PM
FS: Prelude preamp with Dantimax modules Forane12 Swap Meet 1 25th March 2016 08:54 PM
Prelude pre-amp with Dantimax stuff and chassis Leeuwarden Swap Meet 6 24th June 2012 09:53 AM
elktor mini crescendo xcicc Solid State 3 13th May 2011 09:34 AM
spendor prelude mr scratch Multi-Way 0 15th January 2011 11:05 AM


New To Site? Need Help?

All times are GMT. The time now is 11:15 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki