|9th January 2016, 12:57 PM||#1|
Join Date: Oct 2011
Location: Somewhere in Germany
I've got some issues with an EQUA amplifier I had built four decades ago. The circuitry:
The symptoms: No amplification, i.e. no signal at the output terminals. The amp draws .7 amps out of the 65 volts power supply, with increasing tendency, even if bias potentiometer P2 is set to minimum. Voltage at the output terminal #5 reads about 11 volts, also does the first transistor's emitter voltage. Base voltage of T1 reads about 12,5 volts, which means reverse polarization of the base emitter diode. The transistor itself tests ok with hFE of about 150, but why does it behave this way? Why doesn't the emitter voltage follow the base voltage, adjusted by resistors R2 and R4?
Last edited by Kay Pirinha; 9th January 2016 at 12:59 PM.
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Elektor Equa Amplifier||areed||Solid State||10||2nd June 2016 07:33 PM|
|Crossover issues||SpiXe||Multi-Way||15||7th December 2011 01:23 PM|
|Clock issues||josha||Digital Source||7||6th December 2011 10:50 PM|
|Matching issues- I can't believe it!?!||folkeb||Pass Labs||6||6th November 2006 04:08 PM|
|Any issues with TA2041?||bimbla||Class D||1||15th March 2005 08:40 AM|
|New To Site?||Need Help?|