Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Elektor News and offers from Elektor Magazine

Reply
 
Thread Tools Search this Thread
Old 28th August 2009, 01:42 PM   #21
Kay is offline Kay  Germany
diyAudio Member
 
Join Date: Nov 2001
Location: Emden
Thanks,

if you need my layout/schematic as pdf,
I will post it
__________________
best regards
Kay
  Reply With Quote
Old 11th January 2013, 04:08 PM   #22
scafas is offline scafas  Italy
diyAudio Member
 
Join Date: Dec 2007
Location: italia
Default sound of this card

I built this preamp according to the letter to the wiring diagram, it works perfectly but the sound 'pissed brilliant high frequencies and poor at low frequencies.
how can I tweak the circuit to obtain a balanced sound?

SLN Pre-Amp - Elektor Aug 1982
  Reply With Quote
Old 13th January 2013, 02:54 PM   #23
tiefbassuebertr is offline tiefbassuebertr  Germany
diyAudio Member
 
tiefbassuebertr's Avatar
 
Join Date: Jul 2005
Location: D-55629 Schwarzerden
Quote:
Originally Posted by GlidingDutchman View Post
I want to attempt building this phono pre-amp (see attached schem).

Any tips and ideas on how to possibly improve the circuit?

I am going to configue it for MC cartridges.
Yes. I would say, the choice of input transistors in parallel mode isn't the best, because only 0,22mA/each transistor is adjust (15V/68K).
Unfortunately I am not able, to call you the ideal choice. Maybe jFETs are a better choice.
  Reply With Quote
Old 14th January 2013, 12:01 PM   #24
Kay Pirinha is online now Kay Pirinha  Germany
diyAudio Member
 
Kay Pirinha's Avatar
 
Join Date: Oct 2011
Location: Somewhere in Germany
Quote:
Originally Posted by scafas View Post
I built this preamp according to the letter to the wiring diagram, it works perfectly but the sound 'pissed brilliant high frequencies and poor at low frequencies.
how can I tweak the circuit to obtain a balanced sound?
Does the total capacitance value in parallel to the inputs match to the value given in your cartridge's data sheet?

Best regards!
  Reply With Quote
Old 14th January 2013, 12:04 PM   #25
scafas is offline scafas  Italy
diyAudio Member
 
Join Date: Dec 2007
Location: italia
Default ??

i don't know .
i have a MISSION SOLITAIRE and i put a 100pf cap on input pre.
it's correct?
  Reply With Quote
Old 14th January 2013, 02:01 PM   #26
Kay Pirinha is online now Kay Pirinha  Germany
diyAudio Member
 
Kay Pirinha's Avatar
 
Join Date: Oct 2011
Location: Somewhere in Germany
I also don't know. Just have a look on it's datasheet.

Best regards!
  Reply With Quote
Old 6th April 2013, 09:46 AM   #27
tiefbassuebertr is offline tiefbassuebertr  Germany
diyAudio Member
 
tiefbassuebertr's Avatar
 
Join Date: Jul 2005
Location: D-55629 Schwarzerden
Quote:
Originally Posted by tiefbassuebertr View Post
Yes. I would say, the choice of input transistors in parallel mode isn't the best, because only 0,22mA/each transistor is adjust (15V/68K).
Unfortunately I am not able, to call you the ideal choice. Maybe jFETs are a better choice.
german version from Elektor is read about
http://www.magnetofon.de/supra/Supra_Elektor.pdf
basic description of the topology you will find there:
http://www.diyaudio.com/forums/solid...s-circuit.html
main disadvantage I mentioned in my last post.
I want to modify the circuit in such way, that each input transistor runs with 3mA instead only 0,22 mA idle current. Secondly I want to use for the outputs power darlingtons (like BD675/BD676) an idle current between 50-100 mA.
How I calculate the new values of the resistors R11/13/14 (pos. half) so as R10/18/19 (neg. half) from the first pdf link here ?
Thank you very much for advices.
Best thanks in advance.
  Reply With Quote
Old 28th July 2016, 03:22 PM   #28
Kay is offline Kay  Germany
diyAudio Member
 
Join Date: Nov 2001
Location: Emden
Moin,
a guy asked me january this year for a pdf with my design,
unfortunately I see it but now
I believe is't better to post the original Protel Autotrax file
Protel Autotrax is a very dos programm
and if I remember correct, it's freeware.

If AutoTrax not work, use Target, Protel99se or other

PAMP1101_pcb_ProtelAutoTrax.zip
__________________
best regards
Kay
  Reply With Quote
Old 24th February 2018, 12:05 AM   #29
souplesse is offline souplesse  France
diyAudio Member
 
Join Date: Feb 2017
Location: French Alps
Quote:
Originally Posted by Kay View Post
Moin,
a guy asked me january this year for a pdf with my design,
unfortunately I see it but now
I believe is't better to post the original Protel Autotrax file
Protel Autotrax is a very dos programm
and if I remember correct, it's freeware.

If AutoTrax not work, use Target, Protel99se or other

Attachment 562169

May a PC-user upload a pdf of the design ?

thx
  Reply With Quote
Old 16th April 2018, 11:28 AM   #30
mkuehne is offline mkuehne
diyAudio Member
 
Join Date: Mar 2010
Default Gain?

Quote:
Originally Posted by AndrewT View Post
+55db of gain from an LTP+VAS single stage amp sounds quite ambitious.
Where is that value from? The relation of R15/R14 makes 55dB, but no sense. Usually I'd take the feedback-filter 1kHz impedance in relation to R14 - if I made no mistake, that's about 35dB@1kHz. Only the lowest bass gain is about 20dB higher...
And what is ambitious about 55dB sub-bass gain? There are BC550C/560C used, each with at HFE at least about 400 (a combined current gain of more than 90dB), both stages with voltage gain. Enough for low distortion by a certain amount of feedback even in the bass - but also low enough for absolute stability and slope fidelity...
  Reply With Quote

Reply


SLN Pre-Amp - Elektor Aug 1982Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Update for Elektor Crescendo Power Amplifier 1982 bjornagain Elektor 188 1st October 2018 12:30 PM
I need comments about "100W power amp. elektor april 1982" jinkuchi Elektor 78 22nd February 2011 05:15 PM
Elektor 1982 Simulation bvp9223 Solid State 9 21st December 2004 08:55 PM


New To Site? Need Help?

All times are GMT. The time now is 09:44 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki