Go Back   Home > Forums > > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Elekit News and products from Elekit

Reply
 
Thread Tools Search this Thread
Old 4th March 2018, 05:44 AM   #1
vkung is offline vkung  Canada
diyAudio Member
 
Join Date: May 2005
Location: Vancouver BC Canada
Default elekit TU-HP03 PORTABLE TUBE HEADPHONE AMP

ELEKIT TU-HP03 $275

Vacuum Tube Hybrid Portable Headphone Amplifier [ TU-HP03 ]

Click the image to open in full size.



TU-HP03 is a successor model of reputed TU-HP01 which casted aside negative images of traditional vacuum tube amps, such as "heavy", "hot", "expensive", etc, and enjoyed a good reputation by its rich and warm sound from various age groups of people. This new model takes over such goodnesses of TU-HP01, and attractive features are added.

[TU-HP03 FEATURES]
■Battery-operated sub-miniature vacuum tube (Raytheon 6418)
The same tube as TU-HP01 are used. Low consumption current and almost no heat generation so that there is no worry about the ventilation for heat release.


■Even lower noise than TU-HP01
The microphonic noise, often controversial in battery-operated portable tube amp, is even minimized than that of TU-HP01 by floating the tubes from the PCB and reviewing the circuit configuration. In addition, the white noise which could be annoying to your ears while there is no sound signal input is eliminated for better sound experience.

■Dual OPamp for each channel
For the earphone driving output stage, a dual OPamp is adopted for each channel, and the driving ability is boosted by connecting the OPamps in parallel, and the separation is also improved by 2 OPamps individually equipped for each channel.

Click the image to open in full size.


■Same as TU-HP01, users can exchange the OPamp with many other commercially-available OPamps sold in the market at reasonable prices to enjoy the sound difference.
TU-HP03_OPamp.jpg
Click the image to open in full size.

■Betterment upon Power ON
Although vacuum tubes are used, the amp can be ready to use in only several seconds after power ON. In addition, almost there is no pop noise upon power ON.

■Dual supply for OPamp
Large capacitors which have much effect on the sound are removed from the output stage to give clarity to the sound.

■Gain SW
Users can select either high or low gain according to the input level.

Click the image to open in full size.

SPECIFICATIONS


Stock tube 6418 (Raytheon) x 2pcs
Stock OPamp JRC NJM2114DD (exchangeable for other OPamp)
Frequency response 10Hz-150kHz
Headphone impedance 16Ω-32Ω recommended
Input terminal 3.5mm stereo mini jack
Output terminal 3.5mm stereo mini jack
Power supply "AA" dry cell battery x 4pcs or "AA"Ni-MH rechargeable battery x 4pcs
* Battery life: Over 15 hours
Dimensions W74.5 x H17.5 x D162mm (incl. projections)
Weight 190g (excl. projections)


Elekit TU-HP03 | Super Best Audio Friends


Click the image to open in full size.

Last edited by vkung; 15th April 2018 at 04:05 AM.
  Reply With Quote

Reply


elekit TU-HP03 PORTABLE TUBE HEADPHONE AMPHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Elekit TU-HP02 Discrete Portable Headphone Amp vkung Elekit 0 21st September 2015 01:39 AM
Portable Tube/Hybrid Headphone Amp petesjoy Headphone Systems 1 15th November 2009 01:57 PM


New To Site? Need Help?

All times are GMT. The time now is 07:36 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio
Wiki