|4th February 2018, 03:23 PM||#1|
Join Date: Jan 2015
Location: Georgian Bay
Replacing sockets on the TU-8340VK
The only thing I've never liked on my Elekit TU-8340 is the octal sockets. The porcelain seemed sloppy around the tube's centre key and the contacts did not inspire confidence. So I cracked them with ViceGrip pliers, I had to crack each one a few times, then easily removed the pins individually.
I replaced them with Teflon composite sockets. These are available from Partsconnexion and DIY Hifi Supply. I pressed the sockets as close to the board as possible then raised them about 1mm before soldering so they would protrude through the top of the chassis slightly.
Tubes now index more easily and the pins seem to grip the pins more securely.
Cheers, Steve Graham
|Thread Tools||Search this Thread|
|Thread||Thread Starter||Forum||Replies||Last Post|
|Review - TU-8340VK||vkung||Elekit||0||14th March 2017 09:50 PM|
|Bob'3 TU-8340VK||vkung||Elekit||0||14th December 2016 09:30 PM|
|TU=8340VK||vkung||Elekit||0||13th December 2016 06:06 AM|
|Finally TU-8340VK is available||vkung||Elekit||0||23rd November 2016 05:52 PM|
|Replacing Lamp Sockets To One With Higher Power Rating?||kelticwizard||Everything Else||3||15th December 2010 03:59 PM|
|New To Site?||Need Help?|