TU-8300R / TU-8600

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
This TU-8300R was built in 2013 with Tango XE-20S.
(THE TANGO trade mark was purchased by WAVAC Audio Lab. Co., Ltd in 2015)

A lot of Elekit fans asked me the different of TU-8300R with Tango and TU-8600 with Lundahl.

Here are the summaries :

Price:
1. In 2013, I paid $600 for a pair of Tango EX-20S. Today you need to pay more than $1200-$1500 for a pair.. IT is too much for XE-20S from WaVac.

2. Lundahl 2770 is custom made for TU-8600. The price is 30% of Tango XE-20S. LL2770 is a C core.


Lower NFB
NFB is applied to the cathode of the 300B by the third winding of the output transformer as well as to the voltage of the amplifying stage. Overall NFB of TU-8600 is minimized as well as the chance for transient response.

Lower Nosie Level
All power is stabilized to reduce residual noise as much as possible. This results in a noise level that is as low as 1/10 of the TU-8300R. Amazing design

Headphone feature (TU-8600 only)
It works well with LCD3 and HIfiman 1000

Elekit TU-8300 with Tango XE-20S on Vimeo


ELEKIT TU-8600 300B SET AMP on Vimeo


flags_1
 
Last edited:
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.