diyAudio

diyAudio (https://www.diyaudio.com/forums/index.php)
-   Elekit (https://www.diyaudio.com/forums/elekit/)
-   -   Elekit TU-8500 Phono Amp (https://www.diyaudio.com/forums/elekit/268734-elekit-tu-8500-phono-amp.html)

HeavyNova 2nd September 2019 07:16 PM

1 Attachment(s)
Here's all I could find. Is "MP02" Version 2? I am really excited to get the Elekit built. I've heard some very good things about it and the downloaded English instructions have been very, very good otherwise and was only missing two resistors which also gave me an excuse to order other upgraded parts for it as well including vintage polycarbonate, polystyrene and MKT1822 caps, gold plated Mill-Max opamp sockets, as well as Shuguang 'Sounds of Nature' 12AT7's.


The Nichicon HV/VY and polymer caps it comes with are very good and hard to beat in most specs. and locations. However, I'm going to incorporate 4 Elna Silmic 220uf 35V that tested lower ESR than the (4) 220uf 25V it came with and hopefully try the recommended opamp upgrade as well.

vkung 3rd September 2019 02:16 AM

on the manual of your amp

HeavyNova 3rd September 2019 12:50 PM

Haha. The manual is all in Japanese, I don't see it listed anywhere.. However, I am building it according to the schematic that came with it, so hopefully it will get built correctly.


All times are GMT. The time now is 03:24 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 17.65%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio

Wiki