Install Amtrans carbon film resistor to TU-8200DX

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Jump to Latest
vkung

vkung

Member
Joined 2005
The size of 1/2W Amtrans is bigger than stock 1/2w metal film resistor. To replace the existing resistor, you will need to adjust the angle of the Amtrans Carbon Film resistor to install it on the PCB. This picture shows how it should look once bent and installed properly.



 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Top Bottom