install USB 3249R DAconvertor in Elekit 8200DX
Where does one pick up the 5 volt DC supply to the usb module, from the 8200 board, if one does not wish to power the unit from the PC usb port? This appears to utilize the jumpers at 1,7,9 for "self" power as opposed to "B" for usb 3.3volt sourcing.
Most of the little manual is in Japanese, so I may be misconstruing how the component is to be used. The output from the DAC utilizes a 3.5 mm minijack which connects to another minijack next to the 8200 amp's Line 2 RCA inputs, (inactivating them when it is engaged)
Where does one pick up the 5 volt DC supply to the usb module, from the 8200 board, if one does not wish to power the unit from the PC usb port? This appears to utilize the jumpers at 1,7,9 for "self" power as opposed to "B" for usb 3.3volt sourcing.
Most of the little manual is in Japanese, so I may be misconstruing how the component is to be used. The output from the DAC utilizes a 3.5 mm minijack which connects to another minijack next to the 8200 amp's Line 2 RCA inputs, (inactivating them when it is engaged)
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.