Elekit TU-870R (New Price) $315.00

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Elekit 870R

tu-870R-1.gif


TU-870R_2.jpg


tu-870optn.gif

Optional Parts

l_aa_TU870R_03-1.jpg

Optional Speaker


Here is the wonderful comment from Audioasylum
Bench tests and listening impressions - 4season - VK Music - Elekit & Triode Japan Forum
VK Music - Elekit & Triode Japan Forum: Building the TU-870R (photos) by 4season
Amp/Preamp Asylum: RE: (strong)REVIEW: Elekit TU-873LE II Amplifier (Tube)(/strong) by geraldm121
Amp/Preamp Asylum: RE: Building My FIrst Kit...What Fun by geraldm121

Features:
This is a single stereo power amplifier using the 6BM8 vacuum tube that has a five triode for power amplification and a triode for amplified voltage. Assembly is easy. Anyone can follow the printed circuit board and obtain the same result. For this reason, you do not need to know the details of wiring and other technical details to assemble a vacuum tube.

This amplifier installed with advanced "R-core transformer" as a power transformer that enables clear tone quality. To improve transient characteristics.
Specification:
Vacuum tube : 6BM8 x2
Rated output : 2W + 2W(8Ω)
Rated input : 600mV
Input resistance : 45kΩ
Residual noise : 80μV(IEC WEIGHTING)
S/N ratio : 94dB(IEC WEIGHTING)
Frequency response : 26~37,000Hz
Power voltage : AC120V 50 / 60Hz
Power consumption : 35W
Dimension : W130 X H130 X D263mm (including projections)
Weight : 2.9kg
Input terminal : Line x 2 (RCA pin jack)
Fuse : 1A
VKMusic.ca Home page

Price $315
VKMusic.ca Home page
 
Last edited:
didn't realize Elekit could be so affordable

Hm:

a cd player ($390.00), an amp ($315) and some DIY speakers (maybe not the Elekit) and the pre-amp ($345.00)

LP ready , all tube system w/cd player ($1060 w/o tax). I like 6BM8 tubes, and the Japanese seem to as well. Not sure of the circuit, but must be similar to the SE84C from Decware
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.