Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

What is Gain Structure?
What is Gain Structure?
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 9th September 2012, 11:06 PM   #91
noddy55 is offline noddy55
diyAudio Member
 
noddy55's Avatar
 
Join Date: Feb 2012
Hi,

Mr.Stephan Gro▀kla▀ (sgrossklass) and Mr.Michael Mardis (Pano),

Thank you very-very much for both of your contributions. Topics about "Gain Structure" and "Noise in Amplifiers", really are invaluable and encouraging articles for a novice at diyaudio. Specially, for those who are seeking for a good and reliable source of information to build better audio projects, and amplifiers or even just to improve the skills.

After reading your articles, I am now a lot more in a better position to design, execute and share my audio amplifier project, at diyaudio.
Also, i found the answers to lot of my questions which were floating inside the no gravity space region of my mind since my teenage or even my childhood.

We are keen and interested to wait for your future articles on Audio amplifiers, high current buffers, noise, speakers, crossover designs, filters, equalization techniques, op-amps, surround sound techniques and other such related articles mostly contributing towards the better sound quality or achieving a perfect diy audio systems. We would also like to see circuits in action (if possible and applicable) along with the theory part.

Thanks a lot to both of you.

Last edited by noddy55; 9th September 2012 at 11:14 PM.
  Reply With Quote
Old 10th September 2012, 02:19 AM   #92
Pano is offline Pano  United States
diyAudio Moderator
 
Pano's Avatar
 
Join Date: Oct 2004
Location: SW Florida
What is Gain Structure?
You are very welcome.
  Reply With Quote
Old 8th December 2012, 01:08 AM   #93
stevensoosai2527 is offline stevensoosai2527
diyAudio Member
 
Join Date: May 2012
Great article. Thank you.
  Reply With Quote
Old 8th December 2012, 02:20 AM   #94
nigelwright7557 is offline nigelwright7557  United Kingdom
diyAudio Member
 
nigelwright7557's Avatar
 
Join Date: Apr 2008
Location: Carlisle, England
Having earlier stages turned down with the amplifier on full will often cause a poor gain structure. Any noise/hum will be accentuated.
__________________
PCBCAD51 and PCBCAD360 out now >>> https://www.murtonpikesystems.co.uk
  Reply With Quote
Old 22nd December 2012, 09:51 AM   #95
Telstar is offline Telstar  Italy
diyAudio Member
 
Join Date: Dec 2007
Location: Italy
Great article
I'm already of the opinion that a preamp is not needed with an all-digital setup with 2V+ line output.
I have a low gain amp (the F3) and more traditional ones, and I find about 10x gain to be all needed for home reproduction.

Now the issue is where to attenuate. Doing it at the power amp imput is NOT the ideal solution, the best option would be to adjust the gain of the amp itself (like Ayre and ASR do).
The ideal gain structure would be
2-2,5V from digital source -> input buffer -> adjustable VAS from like 0,1x to 20x (to provide for less efficient speakers) -> unity current gain.

The main difficulty to DIY this is from remote controlling the "volume" and from lack of published schematics.
If we loose a bit of signal purity (and SNR), a buffer type preamp with a pot in the middle can work almost as well and there are cheap and easy schematics availalbe, but it is still a waste of 3 stages and a pair of cables that all degrade the signal.
__________________
"The response of the inner ear extends to at least 200khz" Dr W. Tempest
  Reply With Quote
Old 22nd December 2012, 03:28 PM   #96
Pano is offline Pano  United States
diyAudio Moderator
 
Pano's Avatar
 
Join Date: Oct 2004
Location: SW Florida
What is Gain Structure?
Glad you liked the article.

Yes, an adjustable VAS in the power amp might be the ideal approach, sonically. But as you point out, maybe not so practical or easy to find. For me, finding an amp that has a little more gain than I need, then attenuating it some at the input, is the most practical solution. With modern 2V sources it's gotten much easier.
__________________
Take the Speaker Voltage Test!
  Reply With Quote
Old 22nd December 2012, 04:20 PM   #97
Telstar is offline Telstar  Italy
diyAudio Member
 
Join Date: Dec 2007
Location: Italy
If the gain would be controllable with a single variable resistor (read linear pot), it would be much easier to diy... I want to do some research, with the many talented people roaming around, something may come out.

Things gets a lot more difficult with active multiamplified systems, where one needs to match amp and speaker gain, plus a desire to remotely control all the system at once (after level-matched). In a 2 way I was able to level-match with ears adjusting the pot of an integrated amp i have.

I'm mostly rumbling out loud.
Were you aware of a translation of your article on the italian webzine ReMusic?

Maximizing SNR is a very sensible topic for me, I'm reading the link posted here about an article on noise.
__________________
"The response of the inner ear extends to at least 200khz" Dr W. Tempest
  Reply With Quote
Old 22nd December 2012, 05:20 PM   #98
Pano is offline Pano  United States
diyAudio Moderator
 
Pano's Avatar
 
Join Date: Oct 2004
Location: SW Florida
What is Gain Structure?
Quote:
Were you aware of a translation of your article on the italian webzine ReMusic?
Yes, they have permission from me and diyAudio. It's also in Chinese.

Let us know what you come up with for variable gain.
  Reply With Quote
Old 3rd February 2013, 02:07 PM   #99
Dante Marone is offline Dante Marone  United States
diyAudio Member
 
Join Date: Jan 2013
Location: NYC
This is an issue I'm about to have to deal with because I'm going tri-amp, and since I can't afford those tube-crossovers that Marchand(?) make I'm going to have to use DBX or Behringer pro model. Something like the ART CLEANBoxPro Stereo Balanced/Unbalanced Converter to adjust the unbalanced lower consumer level output of my preamp to better match the input, but my power amps are consumer w/o gain controls. Suggestions?
  Reply With Quote
Old 3rd February 2013, 02:11 PM   #100
SY is offline SY  United States
On Hiatus
 
SY's Avatar
 
Join Date: Oct 2002
Location: Chicagoland
What is Gain Structure?
Replace the output amps of the Behringer with balanced RC filters (Jan Didden wrote a very clear article on how to do that). Pano prefers using output transformers to do the same job. Either way, the performance of the Behringer is improved and the levels are more suitable for consumer gear. As a bonus, you can take an spdif output directly from your digital source, run it into the Behringer's spdif/AES-EBU input, and bypass the ADCs completely.
__________________
"You tell me whar a man gits his corn pone, en I'll tell you what his 'pinions is."
  Reply With Quote

Reply


What is Gain Structure?Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
help on amp gain structure nicoch58 Tubes / Valves 3 17th December 2010 12:09 AM
S/PDIF data structure billbo Digital Line Level 4 14th October 2008 01:16 PM
6M6G Structure of the circuit RCA245 Tubes / Valves 2 11th April 2005 06:51 PM
Anybody know anything about this kind of motor structure? 454Casull Multi-Way 2 3rd August 2004 01:40 AM


New To Site? Need Help?

All times are GMT. The time now is 01:32 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki