Go Back   Home > Forums > >

Audio Component Grounding and Interconnection
Audio Component Grounding and Interconnection
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools
Old 24th January 2021, 08:56 AM   #51
russc is offline russc  England
diyAudio Member
 
Join Date: Mar 2011
Location: W Yorkshire
Not at all. Think of it as one extra thick grounding cable.
  Reply With Quote
Old 24th January 2021, 10:15 AM   #52
campbellr is offline campbellr
diyAudio Member
 
Join Date: Jan 2013
Thank you. Advice much appreciated.
  Reply With Quote
Old 16th March 2021, 01:15 AM   #53
therling is offline therling  United States
diyAudio Member
 
Join Date: Nov 2009
I just wanted to say that your article of almost eleven years ago (as of March 2021) is still a valuable resource.
  Reply With Quote
Old 5th April 2021, 03:07 PM   #54
Tiguarist is offline Tiguarist
diyAudio Member
 
Join Date: Apr 2021
This masterpiece still deserve kudos, so kudo.
  Reply With Quote
Old 10th April 2021, 02:25 AM   #55
Mello4 is offline Mello4  United States
diyAudio Member
 
Join Date: Jan 2021
Quote:
Originally Posted by russc View Post
Each IEC MUST have its earth connected.
Otherwise, should one or more not be plugged in fully for any reason, accidentally or otherwise, you would lose the safety ground.
It will cause no audible detriment.

Many old houses in the USA only have two wire outlets & for those houses the third wire ground is completely useless.. The neutral (white wire) is somewhat referenced to ground. The black wire is definitely hot.



https://inspectapedia.com/electric/E...onnections.php
  Reply With Quote
Old 10th April 2021, 02:54 AM   #56
rayma is offline rayma  United States
diyAudio Member
 
Join Date: Apr 2011
Yes, however many USA home outlets are also wired backwards.
  Reply With Quote
Old 10th April 2021, 04:51 AM   #57
Mello4 is offline Mello4  United States
diyAudio Member
 
Join Date: Jan 2021
Quote:
Originally Posted by rayma View Post
Yes, however many USA home outlets are also wired backwards.
With a two wire to three wire adapter and a tester, one can check the wiring.


Capture.JPG

d2.JPG
  Reply With Quote
Old 21st July 2021, 06:51 PM   #58
weltersys is offline weltersys  United States
diyAudio Member
 
weltersys's Avatar
 
Join Date: Jan 2008
Location: Florida
Quote:
Originally Posted by Mello4 View Post
With a two wire to three wire adapter and a tester, one can check the wiring.
Unfortunately, most simple testers will not detect a potentially lethal mis-wire, the reverse polarity bootleg ground (RPBG).

A bootleg ground is a wire jumper connected between the bonding screw terminal to the outlet's neutral connection. This practice is a NEC code violation, but a standard 3-lamp receptacle tester will report the outlet as correctly wired, often passing electrical inspections.

An RPBG has hot and neutral wires connected to the opposite terminals (reversed polarity) with the jumper or pigtail connection (bootleg ground) placing live voltage on all grounded parts of all equipment plugged into that outlet, thus allowing people to come into contact with a deadly voltage with a current path back that will not trip a normal circuit breaker, or a GFCI.

Further information on the RPBG can be found here:

Failures in Outlet Testing Exposed | EC&M

A non-contact voltage tester (NCVT) can be used to detect RPBG outlets.
  Reply With Quote
Old 10th October 2021, 03:07 PM   #59
HiDave is offline HiDave  United Kingdom
diyAudio Member
 
Join Date: Oct 2021
Location: Far North of U.K. (Scotland)
This thread is one of many that I used when "trying" to understand the best way to to stop my double insulated (no requirement for electric safety earth) components giving me static shocks!....(The measured potential difference was within the allowed limited for Double insulated).

I might have to revisit what I did & modify, but for now it works....Basically thick cable of suitable voltage/current capacity) soldered to eye terminal sandwiched between the join of the back panel & side panel where there is a screw, as bare metal in the join. This on all three items (network player, amp, CD). The CD & network player connect to the connection on the amp. The amp connection goes to an insulated block with a class x/y cap & a resistor in parallel. This then goes to the earth pin in a plug which is plugged into the mains filter block as per a normal plug.

This now keeps the whole casework at the same potential as earth therefore its no longer "floating" & cannot give off static shocks!

Where I am the electrical safety earth is actually the neutral & actually the armour as we are on PME & single core incomer cable to the fuesboard. Then off course all gas pipes, water pipes & metal sinks & taps are connected to the earth connection in the fuse board to x-bond as per the regs.

I still think I need to add a bridge rectifier maybe next to the cap & resistor?? I also still think that a couple of the back panel connections on the network player are purposely connected to the casework as outputs.....need to have another detailed look...!!!
  Reply to this post

Reply


Audio Component Grounding and InterconnectionHide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Anyone tried component video cable for audio use? brents82 Everything Else 9 6th January 2010 03:02 AM
Bryston quad-complementary interconnection Ragnwald Solid State 33 11th July 2008 04:55 PM
New to car audio and could use some component/sub suggestions Stewart8989 Car Audio 6 14th July 2006 08:09 AM


New To Site? Need Help?

All times are GMT. The time now is 12:02 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio
Wiki