Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

Marantz CD 63 'Radial error'
Marantz CD 63 'Radial error'
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 7th March 2007, 05:26 PM   #1
dingzie is offline dingzie  United Kingdom
diyAudio Member
 
Join Date: Mar 2007
Default Marantz CD 63 'Radial error'

Hi I recently changed the laser transport(cdm 12.1) on my Marantz Cd63 as it was skipping, I carefully installed a next laser transport, on inserting a cd it shows 'disk' on the display when i hit 'play' it comes back with error code 10 - radial error at one stage it did read the disk and play but now has reverted back to the same problem, I removed the the lid and went through the service modes PO1,PO2 and PO3 and everything seems to be working mechanically, sledge moving laser, laser moving up and down to focus, transport going in and out, and with room light off I can see the red light of the laser. I used a fine oil in moving cogs and the bar the laser slides on but still cant get it to work. Any pointers would be greatly appreciated as this might be one for the bin!!
Thanks
Harry
  Reply With Quote
Old 7th March 2007, 06:26 PM   #2
martin clark is offline martin clark  Europe
diyAudio Member
 
Join Date: Jul 2003
Location: Bath, UK
If it's reading the disc TOC more or less then the laser is ok, so it must be scrambled information or a poor-quality signal reaching the decoder.

First thing I would try is gently removing and re-seating the ribbon-cable between the transport and motherboard - sometimes these will come loose with age and heat cycling.
  Reply With Quote
Old 16th March 2007, 07:01 PM   #3
poynton is offline poynton  United Kingdom
diyAudio Member
 
poynton's Avatar
 
Join Date: Mar 2005
Location: UK
The slider rails should be absolutely clean - NO grease - NO oil !!!

Make sure all traces of the old grease are cleaned off the gears and slider - it goes hard with age and stops full movement of the slider.

Andy
__________________
If it ain't broke, break it !! Then fix it again. It's called DIY !
  Reply to this post

Reply


Marantz CD 63 'Radial error'Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Marantz CD63 KI SIG, Error 12, Sled Error problem sisik Digital Source 1 9th November 2008 03:12 PM
Panasonic Radial vs Blackgate Radial Caps blindtiger Parts 1 11th March 2008 01:21 AM
Marantz CD67mkII OSE "Radial error", doesn't read any disks Sarion Digital Source 18 10th October 2006 03:15 AM
Marantz 63 - Error 12 eitank Digital Source 3 19th September 2005 09:05 PM
CD63 occassional radial error Im Sparticus Digital Source 3 27th July 2005 07:57 AM


New To Site? Need Help?

All times are GMT. The time now is 02:29 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio
Wiki