Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

PMA's opamp/buffer pcb
PMA's opamp/buffer pcb
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 26th July 2004, 02:42 AM   #1
garbage is offline garbage  Singapore
diyAudio Member
garbage's Avatar
Join Date: Apr 2004
Location: Singapore
Post PMA's opamp/buffer pcb

Hi All

Wanted to share my experience in using an opamp/buffer on my passive preamp.

After reading about Corey Greenberg's article in the November 1991 issue of Stereophile here , and Burr-Brown's application note on combining an opamp with a buffer (pdf here ), and also carlosfm's thread.

I decided to mod my line drive passive preamp with an opamp and buffer. Also because I wanted to include a headphone jack to drive my grado sr80 as I forsee I'd be using them more often in future.

Eventually I got Pavel's PCB. And built a regulated supply using Pedja's schematics with some changes, such as using 12V secondaries transformers and using a bourns variable resistor (replacing 2.2k resistor) to tune the output voltage and larger caps after the rectifier, and i used 10uF cerafines for C1 and C2.

Some pictures are available herehere.

I used a R4 of 2400R and a R3 of 1000R giving a Gain of 3.4, according to the opa627 datasheet.

I forgot to buy resistors for R10(50R) and am running them jumpered for the moment.

For C6 and C7, I had a BG 4.7uF NX cap that I got recently(ordered that for DAC, but I already scrapped my DAC, so using them here). For C8 and C9, I had 22uF Cerafines.

Initial impressions are that the soundstage is much wider and the bass is much lower. I used to experience resonance with lower bass in my room, but with the preamp's bass,the sound is just great.

Future mods are to build another power supply and also to add a neutrik headphone jack and to box the power supplies up.
  Reply With Quote
Old 2nd August 2004, 02:09 PM   #2
garbage is offline garbage  Singapore
diyAudio Member
garbage's Avatar
Join Date: Apr 2004
Location: Singapore
just added a pair of interconnects that had 50R resistors soldered at one end to parallel signal to ground as suggested by PMA's instructions. the end with the 50R is to be connected to the amps. the outputs of the buffer has 50R in series.

it made more difference to the sound than i imagined. it is less edgy and harsh now. vocals sound much better. bass is still as tight, soundstage is still as wide.

i noticed that at the same volume control level, the sound is generally softer when using this pair of interconnects.
  Reply With Quote


PMA's opamp/buffer pcbHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Opamp Buffer EchoWars Solid State 16 10th May 2007 03:49 AM
UcD400 opamp buffer tomahack Class D 3 1st November 2006 09:56 PM
Opamp + buffer, how to bypass buffer at HF for unity gain? Christer Solid State 10 29th October 2003 06:50 AM
opamp with/without buffer....??? tbla Solid State 11 13th September 2003 03:18 PM

New To Site? Need Help?

All times are GMT. The time now is 02:18 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 16.67%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio