Caps around TDA CD40?

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
Listening to my modded CD40 atm, done the NOS wiring but not sure how to solder the 14 decouping caps on the TDA1541A? do i desolder (remove a little solder first) on the smd or just solder it to the top of the smd?

I meant remove some solder from smd before fitting decoup caps
I have 0.1uf 250v wima fkp2, wima mks2 0.47uf and the old big blue 0.1uf 250v blue cap with legs ready to do

Sounds awesome nice bass and detail
All Elna SimicII except the large 6800uf is a 6800uf 50v Elna Tonerex. Furtech RCA, 24awg silver wiring to RCA. Opamps - lme49720. Rubber mat above mech. Blutac around clock

An externally hosted image should be here but it was not working when we last tested it.


An externally hosted image should be here but it was not working when we last tested it.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.