Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Digital Source Digital Players and Recorders: CD , SACD , Tape, Memory Card, etc.

CD65 II SE restore upgrade options
CD65 II SE restore upgrade options
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 29th July 2013, 02:09 PM   #1
tomst is offline tomst  United Kingdom
diyAudio Member
Join Date: Nov 2011
Default CD65 II SE restore upgrade options

I'm the process of repairing and looking a possible upgrades for the mentioned CD player. Just simple options. After opening it up it became apparent that its Going to need Power supply caps; so it may as well have the lot.
The TDA1541A has three power supplies (+5v,-5v and -15v) each has are 47F 25v nichicon smoothing capacitors connected to ground. i assume it's worth upping the capacitance and this won't have any adverse affects (like burn it out) if so what is a good capacitor to use here guess something like a Panasonic FC or rubicon ZLH.
The OP amps are JRC8021 (probably should replace but for now there staying) and have 220uf 25v elna cerafine smoothing capacitors on the +/-15v power supply again i assume that upping the capacitance is a good option and what is a good cap to use here.
Power supply caps after the diode bridge and before the voltage regulators are are all elna cerafine again these are fairly small so I will be upping the capacitance and voltage on these, In this place I'll be using panasonic FC/FM/FR where I can.
after the voltage regulators they are all 220F 25v elna cerafine smoothing capacitors supplying both digital and analogue circuits I understand that capacitors in this position are sensitive so what are my options here.
The last part is the out put from the OP amps to the RCA there are two elna cerafine 220f 6.3v capacitors negative to negative. I guess this is to replicate a non polar capacitor. In this place would it be better to fit a Proper BP capacitor of equivalent value (110f) and by bypass it with something smaller like a Poly prop film cap or can I go up the capacitance.
the rest of the electrolytics seem to be v supply smoothing on the chips except for 2557 on the radial motor drive that is 0.68f bp
I've attached the circuit diagram for the CD65 II the only differences are in the ps capacitors, the regulator capacitors, op amp supply capacitors and op amp out put capacitors.

Attached Files
File Type: pdf Marantz-CD65II cd.pdf (223.6 KB, 27 views)
  Reply to this post


CD65 II SE restore upgrade optionsHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Pair Quad II in all original condition... restore or sell Katch Tubes / Valves 45 28th February 2013 08:50 PM
Upgrade and restore Threshold S300 aspiens Pass Labs 5 4th October 2011 08:25 AM
Scan-Speak tweeter upgrade options? gfinlayson Multi-Way 13 9th June 2009 02:06 PM
Marantz CD65...keep,upgrade or replace? rmsmax Digital Source 7 20th January 2009 08:01 AM
Dacmagic 2 upgrade options....query Griffymark Digital Source 6 30th March 2006 12:26 PM

New To Site? Need Help?

All times are GMT. The time now is 02:17 PM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 14.29%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio