Is it possible to develop a ASIO driver for PCM2900 based USB Audio interface?

cxhawk · 20th June 2008, 07:20 PM

Or we have to use a TAS1020 with special firmware in order to do this kind of low level interaction?

I'm planning to build my own USB audio interface (2 in/2 out) with low-latency ASIO support.

Thanks.

Joseph R · 3rd December 2010, 08:25 AM

Hi,
Did you find a solution for it?
I'm looking to do the same

rrrremus · 3rd December 2010, 10:43 AM

I do not know if you really need ASIO for your USB interface.
There are no DSP's or mixers in the way, the audio stream is fed directly into the USB interface.
I experimented with PCM2706 and found no need for such.
Or am i missing anything ?

Joseph R · 3rd December 2010, 10:51 AM

Thanks rrremus but the point is that can it handle 2 stereo pair ins if u use 2 pcm2900? If u use only one chip then u dont need drivers but if u use 2?

rrrremus · 3rd December 2010, 11:04 AM

What do you mean by two stereo pairs ?
You want a stereo output and a stereo input via USB ?

luka · 3rd December 2010, 11:51 AM

no, dual stereo output, 4ch

rrrremus · 3rd December 2010, 11:57 AM

There is a similar thread here : http://www.diyaudio.com/forums/digit...ml#post2385882

Joseph R · 3rd December 2010, 03:30 PM

Yep I need a 4 channel output.
The thread you mention rrrremus was started by me and after I saw this one and was wondering if he achieved something.
Thanks

20th June 2008, 07:20 PM	#1
cxhawk diyAudio Member Join Date: Jun 2008	Is it possible to develop a ASIO driver for PCM2900 based USB Audio interface? Or we have to use a TAS1020 with special firmware in order to do this kind of low level interaction? I'm planning to build my own USB audio interface (2 in/2 out) with low-latency ASIO support. Thanks.

3rd December 2010, 11:51 AM	#6
luka diyAudio Member Join Date: Sep 2005 Location: in Slovenia :)	no, dual stereo output, 4ch __________________ home page @ http://www.classdaudio.tk/ @ 24/7 all year long I FEEL SLOVENIA

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
USB AD/DA audio project - PCM2900	verdonc	Digital Source	2	20th July 2010 06:14 PM
ASIO support (driver) for Labview	Aoxomox	Digital Line Level	0	3rd May 2009 06:29 PM
Netjack2 - Foobar2000 (or any other win32 player) and jackrouter asio driver	Theo404	Digital Line Level	5	19th April 2009 05:08 AM
ASIO with Foobar + M-Audio	mourip	Digital Source	4	15th October 2004 12:38 AM
ASIO driver with PCM2902?	djd4n	Digital Source	1	10th August 2004 03:08 AM

New To Site?	Need Help?
Register to Participate Search Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

3rd December 2010, 08:25 AM	#2
Joseph R diyAudio Member Join Date: Oct 2008	Hi, Did you find a solution for it? I'm looking to do the same

3rd December 2010, 10:43 AM	#3
rrrremus diyAudio Member Join Date: Sep 2009 Location: Timisoara	I do not know if you really need ASIO for your USB interface. There are no DSP's or mixers in the way, the audio stream is fed directly into the USB interface. I experimented with PCM2706 and found no need for such. Or am i missing anything ?

3rd December 2010, 10:51 AM	#4
Joseph R diyAudio Member Join Date: Oct 2008	Thanks rrremus but the point is that can it handle 2 stereo pair ins if u use 2 pcm2900? If u use only one chip then u dont need drivers but if u use 2?

3rd December 2010, 11:04 AM	#5
rrrremus diyAudio Member Join Date: Sep 2009 Location: Timisoara	What do you mean by two stereo pairs ? You want a stereo output and a stereo input via USB ?

3rd December 2010, 11:57 AM	#7
rrrremus diyAudio Member Join Date: Sep 2009 Location: Timisoara	There is a similar thread here : http://www.diyaudio.com/forums/digit...ml#post2385882

3rd December 2010, 03:30 PM	#8
Joseph R diyAudio Member Join Date: Oct 2008	Yep I need a 4 channel output. The thread you mention rrrremus was started by me and after I saw this one and was wondering if he achieved something. Thanks