The Well Tempered Master Clock - Building a low phase noise/jitter crystal oscillator - Page 348

andrea_mori · 16th January 2021, 10:02 AM

Quote:

Originally Posted by Vil

Hello , is it still possible to get one TWTMC-DRIXO board without crystal ?

Yes, a few boards are still available.

Remedy · 16th January 2021, 10:20 AM

What about the pierce entry level TWTMC-PPG. Are there any boards left?

andrea_mori · 16th January 2021, 10:32 AM

Quote:

Originally Posted by Remedy

What about the pierce entry level TWTMC-PPG. Are there any boards left?

Yes, a few board left.

Those who are interested please send me the filled order form as soon as possible so I will reply about the availability.

Supersurfer · 10th February 2021, 08:32 PM

The parts are starting to arrive. As I already have the SC cut crystals from the previous groupbuy, when can the semi finished boards be delivered?

Regards,

andrea_mori · 10th February 2021, 09:57 PM

Quote:

Originally Posted by Supersurfer

The parts are starting to arrive. As I already have the SC cut crystals from the previous groupbuy, when can the semi finished boards be delivered?

Regards,

I should receive the semi-finished boards next week.

jimk04 · 20th February 2021, 09:13 AM

I ordered the TWTMC-PPG in both 22 and 24mhz frequencies. I feel I may be better with 2 x 22. I won't ask to alter my order but are the rest of the components on these boards the same as each other, just the oscillator being different.? So I could swap in a 22mhz HC49?
Thanks

diyiggy · 20th February 2021, 01:48 PM

Quote:

Originally Posted by Supersurfer

The parts are starting to arrive. As I already have the SC cut crystals from the previous groupbuy, when can the semi finished boards be delivered?

Regards,

Hi Supersurfer,

Where did you got the short ufl cable of your picture please? Are they 2" long ?

InspectorGadget · 20th February 2021, 02:15 PM

those are SMA cables, not u.fl. you can get 2" u.fl cables at digikey

andrea_mori · 20th February 2021, 02:20 PM

Quote:

Originally Posted by jimk04

I ordered the TWTMC-PPG in both 22 and 24mhz frequencies. I feel I may be better with 2 x 22. I won't ask to alter my order but are the rest of the components on these boards the same as each other, just the oscillator being different.? So I could swap in a 22mhz HC49?
Thanks

Yes, the only difference is the crystal, I update your order.

jimk04 · 20th February 2021, 03:42 PM

Thankyou Andrea. Only if it is no time for you.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
low jitter crystal oscillator IC beta tester needed.	yizhou	Digital Line Level	4	28th April 2013 06:13 AM
Circuit wanted for a Low Phase noise 100MHz Clock	JohnW	Digital Source	58	26th June 2012 09:28 AM
New Ultra Low Phase Noise Oscillator from Crystek	wktk_smile	Parts	7	25th August 2011 08:16 AM
Low jitter 30MHz crystal oscillator?	Kuro	Parts	2	1st April 2010 01:27 AM
Tube Crystal Clock Oscillator	poynton	Everything Else	3	25th August 2008 06:32 PM

New To Site?	Need Help?
Register to Participate Privacy Statement Contact Us	Frequently Asked Questions Did you forget your password? Mark Forums Read


	Please consider donating to help us continue to serve you. Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving

16th January 2021, 10:20 AM	#3472
Remedy diyAudio Member Join Date: Feb 2006 Location: Sofia	What about the pierce entry level TWTMC-PPG. Are there any boards left?

20th February 2021, 09:13 AM	#3476
jimk04 diyAudio Member Join Date: Jul 2018 Location: North Notts	I ordered the TWTMC-PPG in both 22 and 24mhz frequencies. I feel I may be better with 2 x 22. I won't ask to alter my order but are the rest of the components on these boards the same as each other, just the oscillator being different.? So I could swap in a 22mhz HC49? Thanks

20th February 2021, 02:15 PM	#3478
InspectorGadget diyAudio Member Join Date: Jan 2020	those are SMA cables, not u.fl. you can get 2" u.fl cables at digikey

20th February 2021, 03:42 PM	#3480
jimk04 diyAudio Member Join Date: Jul 2018 Location: North Notts	Thankyou Andrea. Only if it is no time for you.