simple and economic.
look here:
Experimenting PCB board creation using a laser printer — LoonaWeb
and the video:
PCB using toner transfer method: video and comparison — LoonaWeb
look here:
Experimenting PCB board creation using a laser printer — LoonaWeb
and the video:
PCB using toner transfer method: video and comparison — LoonaWeb
A big thanks to Tom Gootee (a member here) who has an excellent tutorial HERE.
I've been using this method for a while, pretty much following Tom's method to the letter with excellent results.
Some examples:
Bigger:
Small:
I have even used double sided boards to do the "silkscreen" in copper:
Fast, cheap, tons of fun! Try it today!
I've been using this method for a while, pretty much following Tom's method to the letter with excellent results.
Some examples:
Bigger:
Small:
I have even used double sided boards to do the "silkscreen" in copper:
Fast, cheap, tons of fun! Try it today!
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.