Very nice setup Stéphane...do you have any idea if anyone makes a wider enclosure, wide enough for say...9-10 modules? I have big plans for an Atmos/Auro Amp. I know I could stack 2-5's, but I'd like to have them all in the same housing.
Thanks,
Cory
Nothing new but here is my UCD400HG HxR amp, links below for more pics
http://www.diyaudio.com/forums/class-d/42146-ucd400-q-178.html#post4146913
The UCD modules stayed there even if SMPS replaced the old buzzing iron. That amp and clear speakers show clearly the sound of the sources, it's now obvious how much different they are in tonal balance.
http://www.diyaudio.com/forums/class-d/42146-ucd400-q-178.html#post4146913
The UCD modules stayed there even if SMPS replaced the old buzzing iron. That amp and clear speakers show clearly the sound of the sources, it's now obvious how much different they are in tonal balance.
Attachments
my latest project tda7492
I have just completed this tonight.
Its based on a cheap ebay board.
Its housed in a up-cycled piece of medical equipment .
I am running it of a laptop psu.
I think for the price of board its a good sound
I have just completed this tonight.
Its based on a cheap ebay board.
Its housed in a up-cycled piece of medical equipment .
I am running it of a laptop psu.
I think for the price of board its a good sound
Attachments
D
Deleted member 148505
Nice. You have a lot of electronics stuffed into the enclosure. I have one that I'm trying to decide what to fit inside and how best to do it. Seems too small for 2 amp boards with external driver devices, a PSU PCB and a toroidal, but clearly you did it! But I'm sure I'll figure out something out to put in it.
Rick
Work in progress Class-D/Multi/DSP-Addon.
DSP-Board SigmaDSP ADAU1701/1401A + SRC4382 + PCM5102A - #360customs
DSP-Board SigmaDSP ADAU1701/1401A + SRC4382 + PCM5102A - #360customs
Attachments
I hope these boards are not claustrophobic...
Just kidding!
What are the dimensions of the selected enclosure?
Do you mind providing a link?
Thanks!
D
Deleted member 148505
I hope these boards are not claustrophobic...
Just kidding!
What are the dimensions of the selected enclosure?
Do you mind providing a link?
Thanks!
Haha, I'll replace the transformer with toroidal type for more space and better internal temperature. I'll repost pic later.
Internal dimensions 6.3 x 9.7 x 3.3". Just search 2109 aluminum chassis in eBay or aliexpress.
I drilled small holes under chassis so that the air can flow inside.
I've put the power (blue) and clipping indicator (red) just under the front plate.
Attachments
D
Deleted member 148505
Moolti-Cube.
200Hz 2.2 X-Over (Linkwitz) with Bass-Boost + 2x TPA3132D2. Can be 2.1 (2x50W+100W), 2.2 (4x50W). Pots section at the amps are a bit redundant here, so could easily be broken away.
2.1 active crossover / crossover with MAX4478 - # 360customs
(Beware of the actual wrong schematic, need to fix it)
200Hz 2.2 X-Over (Linkwitz) with Bass-Boost + 2x TPA3132D2. Can be 2.1 (2x50W+100W), 2.2 (4x50W). Pots section at the amps are a bit redundant here, so could easily be broken away.
2.1 active crossover / crossover with MAX4478 - # 360customs
(Beware of the actual wrong schematic, need to fix it)
Attachments
film camera amp
latest ta 2020 amp.
I went to a car boot sale today and came home with a 8mm film camera made in 1973 for £3.
I pulled its mech out and the ta2020 fits nicely inside.
I have a high power led that fits behind the lens and projects light out ,as a power indicator.
It looks great at night with light coming out!
latest ta 2020 amp.
I went to a car boot sale today and came home with a 8mm film camera made in 1973 for £3.
I pulled its mech out and the ta2020 fits nicely inside.
I have a high power led that fits behind the lens and projects light out ,as a power indicator.
It looks great at night with light coming out!
