Amplifiers for DIY subwoofers

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
UcD2k is rated at 2000W @ 2Ω or 2500W @ 4Ω, so you would need 2 modules for your 4 subs and a power supply (SMPS3kA700). You can then decide how you want to wire your voice coils; if you want to wire parallel or in series to run the subs at 2Ω or 4Ω.

There is some discussion around these modules here: UCD2k @ 4.5kW ?
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.