Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Designing the Hypex UCD2k with power supply
Designing the Hypex UCD2k with power supply
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 18th October 2020, 09:34 AM   #1
Trdat is offline Trdat
diyAudio Member
 
Join Date: Nov 2018
Location: Australia
Default Designing the Hypex UCD2k with power supply

I will attempt to make the UCD2k Hypex amp and have two pretty simple questions.

Is one SMP3KA700 enough for 2 UCD2K modules for a stereo set up? Better still how many can it handle out of curiosity? I ask this cause the Apollo Hypex UCD2k has two power supplies for the stereo configuration but not sure if its the SMPS3KA400 or K3700

I have also read that the UCD2K runs hot and needs sufficient cooling. The heat sink runs though the middle of the module with screw holes on the top. How do I add more heatsinks to that? Of course I will leave sufficient air space to the top of the module and the case with holes to breathe but I cant imagine how more heat sinks are attached.

Lastly if anyone would please care to explain what figures I am looking at when trying to figure out how many modules fit on one power supply. Can't figure this out for the life of me, it must be some simple figure that you just look at and add together. What figures on the datasheet?
  Reply to this post

Reply


Designing the Hypex UCD2k with power supplyHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Hypex UCD2K b_force Swap Meet 1 25th December 2019 07:58 PM
Hypex UCD2K and MiniDSP for high power Sub application - Gain Control Corrievr Subwoofers 3 26th April 2019 01:52 AM
Hypex UCD2K RM Swap Meet 0 18th October 2018 06:37 PM
F.S.hypex ucd2k back Swap Meet 6 16th January 2016 01:38 PM
HYPEX UCD2K and SMPS3K 21inch Class D 1 24th January 2014 10:17 AM


New To Site? Need Help?

All times are GMT. The time now is 01:51 AM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1999-2020 diyAudio
Wiki