Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Looking for noobie wiring help to wrap up Boominator build
Looking for noobie wiring help to wrap up Boominator build
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 14th August 2019, 07:28 PM   #1
areohbe is offline areohbe
diyAudio Member
 
Join Date: Aug 2019
Default Looking for noobie wiring help to wrap up Boominator build

I am in the US so I am using Goldman 10" drivers for my build. I am in relatively unfamiliar territory when it comes to wiring and circuits.

The thing that is tripping me up is the Goldman speakers have a single prong terminal connector whereas the HP-10's have a dual prong.

Click the image to open in full size.

Do I need to solder the wires leading to the Piezos to the Goldman terminal? Could I put a t-joint before the drivers? Or would that change my circuit?
  Reply With Quote
Old 15th August 2019, 03:25 AM   #2
Turbowatch2 is online now Turbowatch2  Germany
diyAudio Member
 
Join Date: Aug 2013
Location: Northern germany
Just use a T or wire directly to terminals, will not change anything.
  Reply With Quote

Reply


Looking for noobie wiring help to wrap up Boominator buildHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Noobie Build Bluetooth Speaker. - Visaton Waterproof Driver hempie Full Range 5 27th April 2018 12:54 AM
Noobie first build/learning experience WJeeper Multi-Way 6 6th December 2014 11:10 PM
First build: Basic wiring question‏ soren5 Class D 8 19th October 2011 06:27 PM
Newbie ZBM4 build - wiring looks okay? samtny Multi-Way 4 9th March 2008 08:05 PM
first amp build... wiring questions jdbrocious Tubes / Valves 43 4th March 2008 03:21 PM


New To Site? Need Help?

All times are GMT. The time now is 11:26 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki