Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Tpa3251 board fault LED
Tpa3251 board fault LED
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools Search this Thread
Old 25th March 2019, 08:53 AM   #1
NeoHavic is offline NeoHavic
diyAudio Member
 
Join Date: Nov 2018
Default Tpa3251 board fault LED

I bought a EAUMT-0100-3-A that has the fault LED lit up as well as no audio being output. My setup has the audio coming in as a single ended signal into a miniDSP set to high sensitivity, outputting the audio to the EAUMT-0100-3-A power amp as a balanced signal, and then output to the speakers as a single ended signal once again. The amplifier is being powered by ~29V, and is utilizing the onboard 12V header to power the miniDSP. Input 1&2 are being used, but 3 is not, and does not have the signal input wire plugged into it. The minDSP can “see” that it is getting a signal through the 2x4 Advanced plugin
software, so I know it isn’t that. Grounding the fault pin doesn’t change the status of the LED, while grounding the clip/OTW pin DOES cause the corresponding LED to light up, sonim stumpid in that front as well since the pins are open drain, active low. Any help would be SUPER appreciated! Here’s a link to the datasheet for the amp in question just to be in the safe side of someone hasn’t seen it before:
404 Not Found
  Reply With Quote
Old 25th March 2019, 10:18 AM   #2
imbra is offline imbra  Hungary
diyAudio Member
 
Join Date: May 2015
Location: Budapest
On most TPAs FAULT is lit when one of the speaker outputs are shorted. Have you tried checking for shorts?
  Reply With Quote

Reply


Tpa3251 board fault LEDHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
TPA3251 2Ch Amplifier Board DIY Design (Compact size/Amazing Performance) 3eaudio Class D 108 8th March 2019 06:49 AM
TPA3251 amp and LLC PSU irs20957 Swap Meet 6 22nd November 2018 10:44 AM
TI TPA3251 Evaluation Board for sale pblossom Swap Meet 4 11th December 2017 02:16 AM
Four channel tpa3251 Reigningchamp Class D 1 7th June 2017 11:46 PM
FS: TPA3251 amplifier complete or board shanghai2004 Swap Meet 1 22nd February 2017 05:58 AM


New To Site? Need Help?

All times are GMT. The time now is 07:25 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio
Wiki