Hi. I've picked up some of the blue yuan jing 3116 boards for an embedded project and I'm a total newb who couldn't find a simple answer to how to add a volume control pot to this thing. Would greatly appreciate it if someone could enlighten me.
So I take it I need a 50k audio taper pot per the wiki? Do I need to insert it into the existing circuit somewhere or can I taper the input voltage to the board or the input audio signal?
I'm also wondering if 24V will work okay for supply. I've heard on here that 19V is the sweet spot. I just need the thing to run okay without clipping. Is the difference really significant?
Many thanks
So I take it I need a 50k audio taper pot per the wiki? Do I need to insert it into the existing circuit somewhere or can I taper the input voltage to the board or the input audio signal?
I'm also wondering if 24V will work okay for supply. I've heard on here that 19V is the sweet spot. I just need the thing to run okay without clipping. Is the difference really significant?
Many thanks
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.