Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Class D Switching Power Amplifiers and Power D/A conversion

Noob question on Behringer nu6000dsp - level/limit lights...
Noob question on Behringer nu6000dsp - level/limit lights...
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 9th November 2012, 03:59 PM   #11
ViennaTom is offline ViennaTom
diyAudio Member
Join Date: Apr 2010
So if the rail is 2 x 84V and the amp consists of 2 full bridges, then it can be assumed that it can theoretically put out up to ~1600W into 8 Ohms per channel for very short bursts of a few ms duration. To put this in perspective, my XTI6002 (that is many times more expensive than iNuke) does clip at 144Vpk per channel into 8 Ohms, equal to 1300W bursts. The difference is that the iNuke cannot be bridged, assuming it is already 2 full bridges. And both channels into 4Ohms, the behringer can only sustain less that 1500W /ch. From my XTI6002, I have pulled 2 x 2200W (or 1 x 4500W into 8Ohms), it's PSU can suck >23Amps from the 230V supply and convert it.
Definitely not bad for the iNuke!!
  Reply With Quote
Old 9th November 2012, 08:11 PM   #12
mr. doom is offline mr. doom  United States
diyAudio Member
Join Date: Mar 2006
Location: Montana Missoula
Plugged in the I-Nuke and it sounds like a hairdryer compared to my Crown XLS. This not a problem with livesound but you would probably want to do a fan/shroud mod for home use.

The peak limiters are new for me, anyone know how I should set them up for a pair of 3015Kappalites in large 5cft boxes vented @ 40hz?

I will be running the amp in either 2 x 8ohm mode with the kappalites or using the kappas on one channel at 4ohms and a 8ohm load on the other.
  Reply With Quote
Old 16th October 2015, 01:29 AM   #13
lipimanas is offline lipimanas  India
diyAudio Member
Join Date: Nov 2012
Can anybody please mention what is the VIPer power IC used in INUKE 6000DSP. mine has blown.
  Reply With Quote


Noob question on Behringer nu6000dsp - level/limit lights...Hide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
noob question :/ stenwo123 PA Systems 3 8th September 2012 02:28 AM
Seeking clarification of noob level questions. GestaltH Multi-Way 20 20th March 2008 01:20 PM
speaker level input vs line level question crippledchicken Subwoofers 4 17th July 2007 04:36 AM
iteration limit reached: another numb noob Q Onvinyl Everything Else 3 9th March 2006 10:55 AM
DIY line level schematic... noob here benhart007 Car Audio 3 4th February 2006 06:33 PM

New To Site? Need Help?

All times are GMT. The time now is 10:37 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2018 DragonByte Technologies Ltd.
Copyright ©1999-2018 diyAudio