Memphis 2000 watt blown PS

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I have a memphis mojo 2000w amp with blown power supply. Looks like missing rubber supports caused a rectifier to crack and a power supply fet to crack and POOF! A completely burned power supply.

I did the A1266s, one was split in two. I got ~5V to the gates.

The amp has been worked on before (mismatched date codes in the ouput section) and I thought it was supposed to have IRF3205s.

When I opened it they were all IRF1010E with 22Ohm resistors. Is that the original setup in these amps? My Orion was 22ohm/IRF3205.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.