• Disclaimer: This Vendor's Forum is a paid-for commercial area. Unlike the rest of diyAudio, the Vendor has complete control of what may or may not be posted in this forum. If you wish to discuss technical matters outside the bounds of what is permitted by the Vendor, please use the non-commercial areas of diyAudio to do so.

Blowing fuses

Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
I keep blowing the fuse when I connect the amp board.
I'm sure I have the board wired right. Can anyone tell if I have the power supply wired right to the transformer?
TIA
IMG_0145_zpst4xrpv8c.jpg
 
Disconnect the amp board from the power supply.
Verify the power supply before connecting it back to the amp.

Blowing fuses means you have a serious wiring/circuit issue.
Better pictures and info will help to solve it.

If it's true that the fuse blows when connecting the amp board, I wouldn't be so sure it is wired right.
 
Status
This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.