The mini-A power amplifier system design concepts:
1)It is a small volume to achieve ultimate design, the internal installation of the mini-A 416W transformer and capacity of up to 17W6UF capacitance ,each sound channel using two pairs of ON-current output, fully can be defined as "small hot hatch" .
2)-compatible for easy expandability you DIY Interface , such as the reserve balance of input and modular post-and pre-grade circuit boards, these designs will greatly expanded-- if it is HIFIDIY future finished AUNE goods, we will get rid of the extension interface!
3) providing a good driving force and balanced tone, can drive the vast majority of speakers
4) The overall design of Fe-Al chassis to ensure better heat dissipation throughout the machine where there is more than just good solid nature of
More about this: ÖйúÒôÏìDIY
http://mall.hifidiy.net
1)It is a small volume to achieve ultimate design, the internal installation of the mini-A 416W transformer and capacity of up to 17W6UF capacitance ,each sound channel using two pairs of ON-current output, fully can be defined as "small hot hatch" .
2)-compatible for easy expandability you DIY Interface , such as the reserve balance of input and modular post-and pre-grade circuit boards, these designs will greatly expanded-- if it is HIFIDIY future finished AUNE goods, we will get rid of the extension interface!
3) providing a good driving force and balanced tone, can drive the vast majority of speakers
4) The overall design of Fe-Al chassis to ensure better heat dissipation throughout the machine where there is more than just good solid nature of
More about this: ÖйúÒôÏìDIY
http://mall.hifidiy.net
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.