Go Back   Home > Forums > >
Home Forums Rules Articles diyAudio Store Blogs Gallery Wiki Register Donations FAQ Calendar Search Today's Posts Mark Forums Read

Chip Amps Amplifiers based on integrated circuits

newbie Q on troubleshooting
newbie Q on troubleshooting
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Thread Tools Search this Thread
Old 31st December 2004, 04:02 AM   #1
esc is offline esc
diyAudio Member
Join Date: Jan 2002
Default newbie Q on troubleshooting

happy 2005 ...
need help in troubleshooting this entry amp as i'm just starting out

referring to this 22watt amp using TDA1554 http://www.aaroncake.net/circuits/amp20w.htm

have wired everything point-to-ponit, added a 50k pot and a headphone jack as input
power source was a 12v car battery

- is wiring all ground (signal or pwr) to a single point ok?

- followed the ESP troubleshooting page, and used 2x 100K safety resistors at both 12V+ and - ends for testing

- nothing was warm, not even the heatsink

- output voltage at the speaker ends were about 10mV
with or without an 8ohms load (this is ok right?)

- after removing the two safety resistors, and without load and input, the heatsink became warm but everything else was not

- power source voltage was about 15v
but output voltage at the speaker ends were also about 15v???

- 8ohms load heated very fast if placed in

- any give where i should start looking?
  Reply With Quote
Old 31st December 2004, 10:47 PM   #2
jaudio is offline jaudio
diyAudio Member
Join Date: Oct 2004
check all connection bewteen power supply and chip. Make sure you get the right voltage at pins 5,13 and 14, check for cold solder points
  Reply With Quote


newbie Q on troubleshootingHide this!Advertise here!
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Newbie needs Magnavox console troubleshooting tips robertleo Tubes / Valves 10 20th December 2007 02:55 PM
JVC JA-S55 amp troubleshooting 80sJunior Solid State 0 20th January 2005 08:26 AM
Newbie Troubleshooting Sony CD Changer zozeppelin Digital Source 0 15th June 2004 02:03 AM
newbie post, but hopefully not a newbie question wiredcur Solid State 3 24th August 2002 11:49 PM

New To Site? Need Help?

All times are GMT. The time now is 10:34 AM.

Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.79%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Copyright ©1999-2019 diyAudio