Go Back   Home > Forums > >

Chip Amps Amplifiers based on integrated circuits

Unity Gain Operation (or low gain)
Unity Gain Operation (or low gain)
Please consider donating to help us continue to serve you.

Ads on/off / Custom Title / More PMs / More album space / Advanced printing & mass image saving
Reply
 
Thread Tools
Old 18th January 2004, 11:52 PM   #1
Tomo is offline Tomo
diyAudio Member
 
Tomo's Avatar
 
Join Date: Jun 2002
Default Unity Gain Operation (or low gain)

Hi,

I am thinking about using LM1875 or equivalent power opamps to drive Grado headphones. I am hoping that it might well be operating in Class-A at ear-splitting volume.

The main concern is that it might blow the cans. But what if I operated the opamp at fairly low gain such as 1 ~ 3. I found a following schematics in LM675 specs.

I am wondering if I can use this with LM1875. Also, I am wondering if I were to attack another resistor to the feedback resistor to fix up gain other than 1.

Thanks,

Tomo
Attached Images
File Type: gif stuff.gif (12.5 KB, 620 views)
  Reply With Quote
Old 18th January 2004, 11:55 PM   #2
Tomo is offline Tomo
diyAudio Member
 
Tomo's Avatar
 
Join Date: Jun 2002
Oh,

And, I would be appreciated if you can tell me how this is proper when the chip is not unity gain stable?

Seems like snubber inserted between the inputs ... am I wrong?

Tomo
  Reply With Quote
Old 19th January 2004, 12:31 AM   #3
crown300 is offline crown300
diyAudio Member
 
Join Date: Oct 2002
Location: pittsboro, NC
For 8 Ohm headphones, put a 330 Ohm resistor in series with the headphone.
  Reply With Quote
Old 19th January 2004, 12:49 AM   #4
Bill Fitzpatrick is offline Bill Fitzpatrick  United States
diyAudio Member
 
Bill Fitzpatrick's Avatar
 
Join Date: Jun 2001
Location: Eugene, OR
I'm wondering why it's OK to put a series resistor in line with 8 ohm headphones. Won't this screw up the damping?
  Reply With Quote
Old 19th January 2004, 01:18 AM   #5
crown300 is offline crown300
diyAudio Member
 
Join Date: Oct 2002
Location: pittsboro, NC
1) Per the datasheet, the minimum gain for LM1875 & LM3886 is 10. Then the fastest and easiest way to drop power is to use resistor in series with headphones. For 8 ohms, use 330.
There may be a more "correct" or eligant way, I don't know of one.

1) It may "technically" screw up the damping.

2) Try it, and let us know if it does.
  Reply With Quote
Old 19th January 2004, 03:41 PM   #6
GregGC is offline GregGC  Canada
diyAudio Member
 
Join Date: Oct 2003
Location: Toronto
Default Re: Unity Gain Operation (or low gain)

Quote:
Originally posted by Tomo
Hi,

I am thinking about using LM1875 or equivalent power opamps to drive Grado headphones. I am hoping that it might well be operating in Class-A at ear-splitting volume.

The main concern is that it might blow the cans. But what if I operated the opamp at fairly low gain such as 1 ~ 3. I found a following schematics in LM675 specs.

I am wondering if I can use this with LM1875. Also, I am wondering if I were to attack another resistor to the feedback resistor to fix up gain other than 1.

Thanks,

Tomo

It should work. You can add a res between -In and GND to change the gain. R2/R1 should be bigger than 10 (so that LM1875 is stable). The cap, use someting like 1uF.
  Reply With Quote
Old 19th January 2004, 09:39 PM   #7
Tomo is offline Tomo
diyAudio Member
 
Tomo's Avatar
 
Join Date: Jun 2002
Hi,

I don't want to be limited by the guidelines. Besides according to this schematics, you can have it operating at UNITY gain.

I want to know how the snubber connected across the inputs will bring stability to opamp which isn't unity gain stable.

Tomo
  Reply With Quote
Old 19th January 2004, 09:51 PM   #8
SY is offline SY  United States
diyAudio Moderator Emeritus
 
SY's Avatar
 
Join Date: Oct 2002
Location: Chicagoland
Rather than dropping things with an output series resistor, why not use a 10:1 voltage divider at the input?
__________________
"You tell me whar a man gits his corn pone, en I'll tell you what his 'pinions is."
  Reply With Quote
Old 19th January 2004, 09:53 PM   #9
GregGC is offline GregGC  Canada
diyAudio Member
 
Join Date: Oct 2003
Location: Toronto
Quote:
Originally posted by Tomo
Hi,

I want to know how the snubber connected across the inputs will bring stability to opamp which isn't unity gain stable.

Tomo
http://www.diyaudio.com/forums/showt...threadid=25515
  Reply With Quote
Old 19th January 2004, 11:13 PM   #10
Tomo is offline Tomo
diyAudio Member
 
Tomo's Avatar
 
Join Date: Jun 2002
Hi,

Thank you Greg!

I found the section. Time to study it in close details.

Tomo
  Reply With Quote

Reply


Unity Gain Operation (or low gain)Hide this!Advertise here!
Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
opamps used for unity gain HiFiNutNut Solid State 37 17th February 2016 07:55 AM
Confusion: NFB, OLG, Unity Gain corrieb Solid State 32 9th October 2010 12:57 PM
Unity gain inverter emogstad Chip Amps 1 10th June 2009 03:09 PM
Heretical Unity Gain line stage PLUS a little gain ? yagas Tubes / Valves 7 24th January 2006 01:30 PM
Unity Gain (AV=1) Zen Amp LS Pass Labs 2 16th September 2004 04:40 AM


New To Site? Need Help?

All times are GMT. The time now is 07:47 PM.


Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 15.00%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1999-2021 diyAudio
Wiki