Yes read 0 ohms between all non bridging speaker terminals
If I use the non bridging speaker terminals to measure the voltage on pins 3 and 4
Pin 3:0.00
Pin 4:-0.18
This is on all cards
Not sure if this matters or not but when I received the amp it had this issue and I opened it up and it was packed full of dead roaches and webs I power washed it at the car wash but the issue with the dc on speaker terminals remains
If I use the non bridging speaker terminals to measure the voltage on pins 3 and 4
Pin 3:0.00
Pin 4:-0.18
This is on all cards
Not sure if this matters or not but when I received the amp it had this issue and I opened it up and it was packed full of dead roaches and webs I power washed it at the car wash but the issue with the dc on speaker terminals remains
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- PPI PCX4125